The Sennheiser e602 II Dynamic Microphone follows bass instruments down to the low frequencies that shake things up. The punch of the kick drum keeps its forceful volume at the bottom of the sound image; the attack remains precise throughout the mic’s entire frequency response. The e602 II hears bass guitars and tubas with the same attention to detail: warm, dynamic, and always with substance. It sounds as solid as it looks and, thanks to its lightweight aluminum body, is easy to position – in studios, clubs, rehearsal rooms, at smaller gigs or for home recording.

• Rugged, lightweight aluminum body for stable positioning on long microphone boom arms
• Lightweight high-performance voice coil construction
• Fast transient response
• Low frequency extension
• Ideal for direct use on the most problematic bass signal
• Frequency-independent directivity provides isolation from other on-stage signals
• Humbucking coil
• Integral stand mount

• Dimensions: 60 mm x 153 mm
• Connector: XLR-3
• Frequency Response: 20 - 16000 Hz
• Weight: 318 g
• Sensitivity in Free Field, No Load (1kHz): 0,25 mV/Pa; (50 Hz) 0,9 mV/Pa
• Nominal Impedance: 350 Ohm
• Min. Terminating Impedance: 1000 Ohm

• 1 x Sennheiser e602 II Dynamic Microphone
• 1 x Pouch
• 1 x User Manual
• Manufacturer Warranty