The Audio-Technica AT-LP140XP is a fully manual, high-torque direct-drive DJ turntable that plays 33-1/3, 45, and 78 RPM records and outputs phono-level audio only (no built-in preamp). This finish is black.

DJ Controls

Starting torque is greater than 2.2 kgf.cm. Quartz-locked pitch covers +/-8%, +/-16%, and +/-24%. The S-shaped tonearm has height adjustment, dynamic anti-skate, forward and reverse play, a stroboscopic platter, and a popup stylus target light. The included AT-XP3 DJ cartridge is pre-mounted on an AT-HS6 headshell and feeds a 5.5 mV phono output.

Specifications

• Drive: Direct drive, fully manual
• Motor: High-torque DC motor
• Speeds: 33-1/3, 45, and 78 RPM
• Platter: Die-cast aluminum, mass-damped
• Starting torque: >2.2 kgf.cm
• Wow and flutter: <0.2% (WTD) @ 3 kHz (JIS)
• Signal-to-noise: >50 dB
• Cartridge: AT-XP3 DJ cartridge (0.6 mil conical bonded), pre-mounted on AT-HS6 1/2" headshell
• Replacement stylus: ATN-XP3
• Tonearm: Balanced S-shaped, height-adjustable, detachable headshell; effective length 230.5 mm (9.07"); overhang 16 mm (0.63")
• Applicable cartridge weight: 3.5 to 8.5 g
• Anti-skate: 0 to 4 g
• Pitch control: Quartz lock plus selectable +/-8%, +/-16%, or +/-24%
• Playback: Forward and reverse
• Output: Phono only, 5.5 mV nominal at 1 kHz, 5 cm/sec (no built-in preamp)
• Power: 115/230 V AC, 60/50 Hz
• Dimensions (W x D x H): 452.0 x 352.0 x 158.6 mm (17.80" x 13.86" x 6.24")
• Weight: 10.0 kg (22 lb), without dust cover

In the Box

• AT-XP3 phono cartridge (pre-mounted)
• AT-HS6 headshell
• Dual RCA cable with ground wire
• Counterweight
• Felt mat
• Dust cover
• 45 RPM adapter
• Power cable