This Pioneer TX-9500II stereo tuner/radio has been serviced and works well without issue. There is some light cosmetic wear to the face of unit. Please see photos for accurate condition. The feet are included with the original box. If interested please make us an offer!

Inside it's one of the most circuit-packed AM/FM tuners Pioneer have ever built. And outside it's one of the cleanest and most simple to use.

The Pioneer TX-9500 has a new streamlined look, logically-arranged switches and controls, and a scientifically-designed tuning system that makes it all look so easy.

But it's what's inside that counts: dual-gate MOS FETs and a 5-gang variable capacitor boost FM front end sensitivity to a superb 1.5uV (IHF). The FM IF has 7 ICs with differential amps, 4 ceramic filters (with 2 elements each) and a wide-band linear detector to pinpoint selectivity at 85dB or better and beef up the capture ratio to 1.0dB (IHF). Even in stereo the S/N is a super high 75dB, with total harmonic distortion of 0.2% at 1KHz.

Thanks to the PLL MPX (phase lock loop multiplex) demodulator, stereo separation stretches to a wide 35dB over the 50 to 10,000Hz range. Stability? Even in signal-weak or signal-strong areas your station comes in clean and fresh.

Planning to record off the air? Hit the switch for the built-in 440Hz test signal generator and check the output level against your deck's VUs for optimum adjustment before the music begins.

Type: Mono/Stereo Tuner

Tuning Bands: FM, MW

Tuning Scale: Analogue

Sensitivity: 1.5uV (FM), 300uV (MW)

Signal to Noise Ratio: 77dB (FM), 55dB (MW)

Distortion: 0.5% (FM)

Selectivity: 85dB (FM), 30dB (MW)

Frequency response: 20Hz to 15kHz (FM)

Output: 650mV (FM), 200mV (MW)

Semiconductors: 5 x FET, 15 x IC, 12 x transistors, 19 x diodes

Dimensions: 420 x 150 x 395mm

Weight: 9.5kg