Tannoy PBM 6.5 Studio Monitors 1990s

I've been the single owner of these passive monitors in my home studio. They are in very good condition, with minor blemishes. The cloth on one speaker baffle is slightly loose, but still intact. They still sound excellent after all these years. Included with the speakers is high quality 16 gauge speaker cable with dual banana plug connector on one side, loose wire on the other. Length: 17 ft.

From the Tannoy literature:

The transportable and extremely powerful PBM 6.5 is the result of many years of fine tuning of the PBM concept. Featuring a unique layered injection-molded bass driver and a superb high frequency unit, the 6.5 is the ideal monitor for almost any project production environment. The drivers are controlled by a completely redesigned hardwired hand selected crossover providing uncompromising detail, precise spectral resolution and flat response.

The fully ported cabinet design reduces resonance and diffraction while providing deep line and extended bass. When quality, accuracy and the legendary Tannoy sound are available at such a remarkably reasonable cost, there is simply no other choice.

For musicians, and music studio owners, these speakers have been a Classic in most worldwide studios for years. Very powerful 6.5'' bass driver and a high frequency unit delivering superb sound quality and extremely accurate near-field sound for professional mixing purposes.

Item consisting of a pair of Passive Speakers (requires external amplifier / Not included)

S P E C I F I C A T I O N S

• WOOFER DESCRIPTION 6½" injection molded cone with nitrile rubber surround.

• TWEETER DESCRIPTION ¾" polymide soft dome ferro-fluid cooled.

• FREQUENCY RESPONSE (±3dB) 55Hz - 20kHz (-10 dB @ 40Hz)

• PEAK POWER HANDLING 100 Watts

• IMPEDANCE 8 ohms (4 ohms minimum)

• SENSITIVITY 91dB (88 dB anechoic)

• CROSSOVER FREQUENCY 2.3kHz

• FINISH pewter grey vinyl

• DIMENSIONS (inches) H 12.56 W 8.5 D 8.13 (mm) H320 W 216 D 213

• WEIGHT (lbs.) 12 (kg.) 5.5