Disaster Area Designs DMC-4 Gen3 with gHOST converter and adapter

In excellent working condition. Includes DMC4 Gen3 with built in gHOST adapter and ALSO includes adapter cable kit. This works perfect for controlling the ZOOM multistomp pedals such as the MS-70CDR. No side roller.

Here's the specs:

Compact MIDI Controller with Hot Switch

Control up to four MIDI devices with the DMC-4 Gen3. Select presets, send expression pedal data, control your device’s looper modes, and more. User-definable Hot Switch allows instant functionality in any mode.

The DMC-4 Gen3 uses our advanced Gen3 technology in a compact footprint - just 4.7” x 3.7” x 1.4” (120mm x 94mm x 35mm)

Featuring up to nine control modes, the DMC-4 Gen3 is designed to interface with up to four MIDI devices

Device Control: Program select and bypass for up to four device

Looper Control: Controls the looper on the Strymon Timeline, Eventide H9 / Timefactor, or Line 6 M9/M13.

Utility: User-set actions on left and right buttons (2 commands per button)

Preset: Stores programs from Device Control pages and allows the user to change multiple devices at once.

Set List: Allows the user to re-arrange Preset scenes on the fly

Clock: Access the DMC-4’s built-in MIDI clock and tap tempo interface

Hot Switch: Upper-left switch is user-definable to access tap tempo, favorite preset, hold / freeze, and more.

Bright blue LED display indicates program number, status, and more

One 5-pin MIDI port supports MIDI out using a standard MIDI cable, or MIDI input and output using our MIDI Y-Cable.

One MultiJack connector can function as Expression Pedal input, Tap Tempo Output, Function Switch Output, Footswitch Input, or MIDI Output.

One Expression connnector can function as Expression Pedal input, Function Switch input, or MIDI output.

Internal DIP switches to customize MultiJack functions.

Up to 99 user-accessible presets (if preset page is active.)

Controls up to four MIDI devices

Looper control page

Programmable MIDI clock and tap source to synchronize tempo on multiple pedals

User-definable Utility page sends any MIDI CC command, MIDI notes, bank up and down, more.

USB MIDI or USB Host connection for advanced control possibilities

Runs on standard 9V power, 60mA minimum.