The Fundamental Chorus is a digital emulation of a classic analog chorus, recreating bucket brigade modulation. With 3 types of chorus algorithms to select from, you can get sounds ranging from gentle modulation to 80's tri-chorus.
- Rate: Control the rate of the modulated LFO.
- Depth: Control the depth of the modulated LFO.
- Mix: Control the mix of the effect and the original clean signal. All the way to the left is fully clean, and all the way to the right is fully Reverb.
- Slide Switch – The slide switch allows you to change between 3 different flavors of the pedal.
- Light – Emulates a traditional analog chorus.
- Medium – Adds multiple taps to further modulate a classic chorus.
- Heavy – Emulates a classic Eighties effect, the LCR tri-chorus.
- Bypass Switch – Turns the effect on and off. Hold down to engage tap mode. Hold down again to disengage tap mode.
- Bypass LED - Illuminated when the effect is engaged, and will blink with tapped tempo when tap mode is engaged.
- Trails Modes – Hold down the stomp switch when applying power to the pedal.
- Input Jack - 1/4 inch cable from instrument.
- Output Jack - 1/4 inch cable to amplifier.
- 9v Jack – 9-volt DC, Center Negative, 100mA min.
- Rate: Control the rate of the modulated LFO.
- Depth: Control the depth of the modulated LFO.
- Mix: Control the mix of the effect and the original clean signal. All the way to the left is fully clean, and all the way to the right is fully Reverb.
- Slide Switch – The slide switch allows you to change between 3 different flavors of the pedal.
- Light – Emulates a traditional analog chorus.
- Medium – Adds multiple taps to further modulate a classic chorus.
- Heavy – Emulates a classic Eighties effect, the LCR tri-chorus.
- Bypass Switch – Turns the effect on and off. Hold down to engage tap mode. Hold down again to disengage tap mode.
- Bypass LED - Illuminated when the effect is engaged, and will blink with tapped tempo when tap mode is engaged.
- Trails Modes – Hold down the stomp switch when applying power to the pedal.
- Input Jack - 1/4 inch cable from instrument.
- Output Jack - 1/4 inch cable to amplifier.
- 9v Jack – 9-volt DC, Center Negative, 100mA min.
| Condizione | Nuovo (Nuovo) Gli articoli "Nuovi” sono venduti da un rivenditore autorizzato o dal produttore originale e comprendono l’imballo originale.Scopri di più |
|---|---|
| Marchio | |
| Modello |
|
| Categorie | |
| Formato pedale |
|
Le informazioni sulla sicurezza del prodotto sono disponibili qui.






