Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large diaphragm Audio Technica AT4050 exhibits a remarkable combination of qualities: high SPL capability with transparent and airy uppers/mids complemented by rich low end qualities. Its dual large diaphragms are gold vaporized and aged for consistent, outstanding performance. A precision machined, nickel plated brass acoustic element baffle provides rock solid element stability and exceptional sensitivity.

The 40 Series is a premium line of condenser microphones specially engineered to meet the most critical acoustic requirements of professional recording, live sound and broadcast. Select a model number for detailed product information. The AT4050 features:

Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality

Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone

The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use

Three switchable polar patterns: omni, cardioid, figure-of-eight

Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards

Switchable 80 Hz hi-pass filter and 10 dB pad

Includes AT8449 shock mount Specifications:Element: Condenser Polar Pattern: Cardioid, Omni, Figure-of-eight Frequency Response: 20 - 18,000 Hz Open Circuit Sensitivity: -36 dB (15.8 mV), re 1V at 1 Pa Impedance: 100 ohms Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D. Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa Dynamic Range (Typical): 132 dB, 1 kHz at Max. SPL Phantom Power Requirements: 48V (+/- 4V) Low Frequency Roll Off: 80 Hz, 12 dB per octave Switches: Polar pattern; 10 dB pad; roll-off Weight: 18 ounces Output Connector: XLRM-type Accessories Furnished: AT8449 shock mount; microphone dust cover; protective case

Element: Condenser

Polar Pattern: Cardioid, Omni, Figure-of-eight

Frequency Response: 20 - 18,000 Hz

Open Circuit Sensitivity: -36 dB (15.8 mV), re 1V at 1 Pa

Impedance: 100 ohms

Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.

Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa

Dynamic Range (Typical): 132 dB, 1 kHz at Max. SPL

Phantom Power Requirements: 48V (+/- 4V)

Low Frequency Roll Off: 80 Hz, 12 dB per octave

Switches: Polar pattern; 10 dB pad; roll-off

Weight: 18 ounces

Output Connector: XLRM-type

Accessories Furnished: AT8449 shock mount; microphone dust cover; protective case


Element: Condenser

Polar Pattern: Cardioid, Omni, Figure-of-eight

Frequency Response: 20 - 18,000 Hz

Open Circuit Sensitivity: -36 dB (15.8 mV), re 1V at 1 Pa

Impedance: 100 ohms

Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.

Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa

Dynamic Range (Typical): 132 dB, 1 kHz at Max. SPL

Phantom Power Requirements: 48V (+/- 4V)

Low Frequency Roll Off: 80 Hz, 12 dB per octave

Switches: Polar pattern; 10 dB pad; roll-off

Weight: 18 ounces

Output Connector: XLRM-type

Accessories Furnished: AT8449 shock mount; microphone dust cover; protective case