DBX DriveRack PA2 Signal Processor Speaker Management+Auto Room Correction PA 2

• (1) DBX DriveRack PA2 Complete Sound Signal Processor Speaker Management System PA 2
• (1) DBX RTA-M Omni Condenser Acoustic Measurement Microphone Mic DRIVERACK PA+ 260

Authorized dbx Dealer!

Description of PA2 NEW:

All You Need to Get the Most From Your PA. Now With Complete Control From Your Mobile Device.
The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.

AutoEQ
New, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With the RTA Mic “listening” to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.

Enhanced AFS Feedback Elimination
Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system’s tone. Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.

Updated Wizard Setup Functions
Updated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date. Wizard functions on the DriveRack PA2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. Helps you easily configure level balancing, AutoEQ, Advanced Feedback Suppression, and provides access to built-in and constantly updating speaker tunings from most major speaker manufacturers.

Features:

• DBX DriveRack PA2 Complete Sound Signal Processor Speaker Management System
• All New Setup Wizard
• Streamlined AutoEQ™
• All New AFS™ (Advanced Feedback Suppression)
• Mobile Control (Android®, iOS®, Mac®, Windows®)
• dbx Compression
• dbx Limiting
• Graphic EQ
• 8-Band Parametric EQ (adjusted when using the AutoEQ) Input
• 8-Band Parametric EQs (used for speaker tunings) Output
• Sub-Harmonic Synthesis
• Crossover (supports full range, 2-way, and 3-way systems)
• Driver Alignment Delays

Specifications:

• Input: (2) Line Inputs, (1) RTA Mic Input
  • Input Connectors: (2) Female XLR Line Inputs, (1) Female XLR RTA Mic Input
  • Input Type: Electronically Balanced, RF Filtered
  • Input Impedance: > 50 kOhm
  • A/D Converter: dbx Type IV Conversion System
  • CMRR: > 45 dB
  • Mic Preamp Phantom Power:: +15VDC (RTA)
  • Mic Preamp Equivalent Input Noise (EIN): < -117dB, 22Hz-22kHz, 150 ohm (RTA)
• Output: (6) Line Outputs
  • Output Connectors: Male XLR
  • Output Type: Electronically Balanced, RF Filtered
  • Output Impedance: 120 Ohms
  • Max Output: 20 dBu
  • A/D Dynamic Range: 112 dB A-Weighted, 110 dB Un-Weighted
  • Type IV Dynamic Range: 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, un-weighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
• Input Delay Length: 100ms
• Alignment Delay: 10ms Per Channel (60ms Total)
• Sample Rate: 48 kHz
• Dynamic Range: >110 dB A-Weighted, >107dB Un-Weighted
• THD + Noise: 0.003% Typical at 4dBu, 1 kHz 0dB Input Gain
• Frequency Response: 20Hz - 20 kHz
• Inter-Channel Crosstalk: < -110 dB, -120dB Typical
• Operating Voltage: 100-120VAC
• Power Consumption: 22W
• D/A Dynamic Range: 112dB A-Weighted, 110dB Un-Weighted
• Product Dimensions (H x D x W): 1.75" x 5.75" x 19" inches
• Product Weight: 5.25 Lbs.

for the Quick Start Guide
for the Owner's Manual

DBX Authorized Dealer!

Description of RTA-M:

The optional RTA-M real time audio analyzing mic is the perfect accessory tool for the DriveRack PA, DriveRack PA+ and 260. Used in conjunction with the System Setup Wizard and Auto EQ Wizard the RTA-M is ideal for optimizing the sound quality of even the most difficult of acoustic environments.

The RTA-M is an omni-directional, flat frequency measurement microphone specially designed for the Driverack series to pick up all frequencies from 20 Hz to 20 kHz , ensuring accurate "pinking"/real-time analysis of your audio. It runs on phantom power (supplied by the Driverack units) and comes with a clip and case

Features:

• DBX RTA-M Omni-Directional Condenser Acoustic Measurement Microphone
• Polar Pattern : omni-directional
• Element : back electret-Condenser
• Frequency Response : 20 Hz - 20 kHz
• Impedance : 250 30% (at 1,000Hz)
• Sensitivity : -63 dB +-3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )
• Operating Voltage : phantom power 9V-52VDC

• Best prices - We sell all DBX Products at the lowest price as possible.
• Full Factory Warranty
• Detailed information of all products
• Lifetime Customer Service by DBX Product Experts
• Guaranteed legitimate and authentic merchandise