Avalanche Run

The Avalanche Run is a dreamy stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode), and an assignable expression control that maps the expression jack to a control of your choice, including the toggle. The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in the Dispatch Master but more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that’s just the beginning...

Specs

• Dimensions: 4.75" x 4.15" x 2.25"
• True Bypass: Yes
• All Analog: No
• Polarity: Negative
• Current Draw: 425 mA
• Battery: No
• Flexi: Yes
• Input Impedance: 1M
• Output Impedance: 100 ohm

Expression Jack
The expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper. It is recommended to use a Moog expression pedal with the output adjustment knob all the way up. Other expression pedals are not guaranteed to work with the Avalanche Run.

Flexi-Switch Technology
This device features Flexi-Switch Technology, allowing simultaneous use of momentary and latching style switching. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch, the effect will be bypassed. Since the switching is relay-based, it requires power to pass the signal.

Power
For best results, use the included 9V center-negative 1-amp DC power supply.