The Saramonic Blink 500 RX Dual-Channel Camera - Mountable Wireless Mic Receiver is an ultracompact and lightweight camera-mountable wireless microphone dual-receiver that delivers broadcast-quality sound and works with 2 Blink 500 TX wireless transmitters at the same time (sold separately). The integrated clip can be used as a shoe mount for your camera, and it features a built-in Lithium battery and a USB-C port for charging and powering and recharging in the field with external USB battery packs. Its 3.5mm output is powerful enough for headphone monitoring, and this also means that you don't need to use the noisy preamp in your camera to achieve pristine sound quality. Two output cables are included, TRS for cameras and TRRS for smartphones and tablets that have headphone jacks.

• Frequency: 2.4GHz
• Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
• RF Frequency Band: 2400 to 2483.5 MHz
• Signal to Noise Ratio: ≥70dB
• Voice Delay: ≤6ms
• Distortion: ≤0.1%
• Digital Resolution: 24-bit / 48kHz
• Frequency Response: 20Hz to 16kHz
• Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
• Antenna: Built-In 1/4λ Wire Antenna
• Buttons: On / Off / Pair
• Battery: Built-in Li-ion 3.7V / 400mAh
• Approx. Battery Life: 5 hours
• Charging Connector: USB Type-C
• Output: 1/8' 3.5mm Jack (Headphone Compatible)
• Audio Output Level: 5dB
• Indicator: 1 LED, Blue. Flashing quickly: Paring, Flashing: Not Paired with any TX, Solid Blue: Paired with TX
• Operating Temperature: 0℃ to 50℃
• Storage Temperature: -20℃ to +50℃
• Dimensions: 2.4 x 1.3 x .61” (62 x 33 x 15mm)
• Weight: 1.09 oz (31g)