RODELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres• (over 100 yards). The RODELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RODEs omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.

*range estimations based on optimal environment

FEATURES:
• Series II, 2.4GHz digital transmission
• 128-bit encryption
• Up to 100 metres range*
• OLED display (on receiver)
• One button pairing
• Three level gain control
• AA battery or USB powered
• Includes RODE's broadcast Lavalier microphone

SPECIFICATIONS
Transmission type: 2.4GHz Fixed Frequency Agile System
System dynamic range: 112dB
Range (distance): Up To 100m
Frequency range: 35Hz - 22kHz
Maximum output level: 1v Rms (2.8v P-p)
Max input signal level: 1v Rms (2.8v P-p)
Max latency: 4ms

Receiver (RX-CAM)
Power source: 2 X AA Battery Or MicroUSB
Antenna: Internal
Input connection: 3.5mm TRS Locking Jack Socket - Dual Mono
Input impedance: 300Ω
Dimensions: 111mm X 65mm X 52mm
Weight: 190gm

Transmitter (TX-BELT)
Power source: 2 X AA Battery Or MicroUSB
Antenna: Internal
Input connection: 3.5mm TRS Locking Jack Socket
Input impedance: 10kΩ
Dimensions: 111mm X 65mm X 40mm
Weight: 190gm

Lavalier
Acoustic Principle: Pressure Gradient
Active Electronics: JFET impedance converter
Capsule: 0.10"
Address Type: End
Frequency Range: 60Hz - 18kHz
Output Impedance: 3000Ω
Maximum SPL: 110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level: 189.0mV
Sensitivity: -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted): 25dB-A
Weight: 1.00gm
Dimensions: 12.00mmH x 4.50mmW x 4.50mmD