In a footprint of less than 2 square feet (0.19 square meters), the compact, 16-channel StudioLive 6.0.2 offers 8 mono input channels, 4 stereo channels, and 4 aux buses, each w/a high-quality, 60 mm fader. You get generous analog I/O, 12 XMAX Class A solid-state mic preamps, a Talkback input w/Class A mic preamp, extensive signal processing w/physical controls, MIDI control, accurate metering, and a built-in multichannel recording interface. As w/all StudioLive mixers, the 16.0.2 comes w/a suite of tightly integrated recording, control, and audio analysis software. And it's so lightweight and compact that you can easily hold it in one hand and tuck it under your arm.

StudioLive 16.0.2 mixers provide plenty of DSP power, w/no limitations, no shared resources, no figuring out what processing is available where. You have all of the processing available at all times, w/no compromises or caveats. The unique Fat Channel provides a compressor, limiter, expander, and 3-band semi-parametric EQ on every channel and bus; a highpass filter on each channel; phase reverse for the channel mic preamps; a library of professionally crafted presets; and the ability to save and selectively recall processor settings. A stereo, 31-band graphic EQ sits on the main bus. To top it off, you get two 32-bit delay/reverb effects processors, each w/its own dedicated mix bus and a library of useful effects presets.

Connect a StudioLive 16.0.2 mixer and you'll instantly hear details and clarity you'd expect to find only in a much more expensive console. StudioLive mixers operate at up to 48 kHz for high-definition mixing and recording. High-quality Burr-Brown converters on every input and output provide a best-in-class 118 dB of dynamic range so you'll catch every high and low w/great accuracy and no audible distortion. And our XMAX microphone preamps deliver incredibly high headroom, deep lows, smooth highs, and a rich overall sound.