Wurlitzer 200B Amplifier Kit 200 200A 206 206A 214 Custom

For sale is a custom replacement kit for all 200 / 200A / 200B series Wurlitzer Electric Pianos. This is a stand alone kit that will allow you to run your Wurlitzer on a 9V battery or a 9V 18V  guitar pedal adapter.  The kit does not have vibratto or any features other than volume.  This kit works best with a high Z inputs.  Battery life is about 100 hours with a single 9V battery! You do not need a giant 250V battery like on the original 200B version. Again, my kit is powered by a single 9V battery and you can get high Z line level output from it.

Installation is simple and requires a screwdriver and soldering iron. The amp is a small module that mounts on the reed bar pickups and the power supply section mounts on the amp & control mounting rail. All you need to do is connect power leads to the power switch and holes labeled Power Switch on the power supply board, hook up the copper lead to the reed bar and connect an output wire from the preamp hole labeled O to the volume knob.  You will also need reed bar shields, that can be purchased elsewhere, if you do not have them.  

As you can see from the pictures, a mounting jack, or mounting jack leads, can be installed that break the battery connection when a barrel plug is inserted.  If employing this option, you will need to cut the jumper next to the barrel jack footprint. A mounting jack is not included with this kit.

Please do not send me messages before studying this listing description first.  I'm not interested in adding more features at this time.  I do not offer tech support and do not have the time to walk you through the installation.   

Reverb tip: You can open images in a new tab and expand to see full sized versions.