Wayne Jones WJBP 2024 - Silver (Designed In Australia)

This Pre-Amp has great tone. There are only minor scratches. Not many hours are on this Pre-Amp. It has mainly been in my studio.

Features

• Input 1/4” phono stereo/mono jack
• Input Gain For both Passive & Active basses
• -10 Db pad
• Input Gain clip Indicator LEDS (top left corner)
• Tone controls are critically set by Wayne & are extremely accurate in the attack points of each string. You can set them by one for each string on your bass All +15Db -20 Db
• Incredible separation between the tone controls
• There is also a 30 Hz boost for those that may like it ( not really needed at all as the Bass control gives such a great bottom end with ultimate attack). In/out button for selection
• Compressor: Optical, automatically senses & is very effective even with a very small amount engaged. In/out button for selection
• Balance: This is a balance control for stereo operation e.g. 2 WJ 2x10 or Stereo WJ 1x10 Powered cabs.
• Master volume Controls output
• Pre-Amp Output Indicator LEDS (top right corner) tell you if you are overloading the WJBP output
• Mute - Puts the WJBP in standby mode. LED Indicates when in use. The Mute mode should also be used for power up of the WJ Powered cabs, otherwise a very loud 1000watts will sound when WJ Powered cab (or separate power amp) is turned on.
• Foot switch mutes all output for silent tuning.

Master Outs 2 balanced XLR (recommended) outs for connection to WJ powered cabinets or to separate power amps Balance control on from panel will affect these outputs.

Also a choice of 2 Unbalanced 1/4" outputs for same function. (not recommended as output is lower)

All master outs can be used together as a pair or Individually with balance control set to the respective output

FX Send & Return - Stereo or mono

Foot switch - Mutes all output

DI Output - Balanced XLR out with Level control & ore or post EQ button

Aux Input - Stereo input, both 6.3mm & 1/4” phono. You an use this to plug items such as iPad, iPhone backing tracks etc. to play along with.

Headphone With Volume Control - Plug in your headphones to practise with. You can use the WJBP by itself without plugging into a power amp.

Master Outs 2 balanced XLR (recommended) outs for connection to WJ powered cabinets or to separate power amps Balance control on from panel will affect these outputs.

Also a choice of 2 Unbalanced 1/4" outputs for same function. (not recommended as output is lower)

All master outs can be used together as a pair or Individually with balance control set to the respective output

FX Send & Return - Stereo or mono

Foot switch - Mutes all output

DI Output - Balanced XLR out with Level control & ore or post EQ button

Aux Input - Stereo input, both 6.3mm & 1/4” phono. You an use this to plug items such as iPad, iPhone backing tracks etc. to play along with.

Headphone With Volume Control - Plug in your headphones to practise with. You can use the WJBP by itself without plugging into a power amp.

Rack Mount Ears - Included

Specifications

• Input 1/4” Active Unbalanced
  Impedance 220K
  Max Level +20dBu
• Outputs
  Balanced XLR
  Impedance 300 Ohm
  Max Level +27dB
  1/4” TRS Unbalanced
  Max Level +22dB
  Frequency Response 10 hZ to 20 KHZ
  THD+Noise@1KHz 2.5 %
  Signal to noise ratio >80dB Limit 2
  Total Gain 62dB
  Universal Line Voltage 115/240 VAC, 50/60Hz
• Shipping size
  40.5 cm x 32.5 cm x 18 cm
  Weight 5.9kg

• Rear Panel
  Inputs 1/4” & 3.5mm TRS Active Stereo
• Impedance 20K
  Max Level +15 dBu
• EQ Band frequencies:
  Band 1 20-300Hz, Centre set at 80Hz
  Band 2 60-1KHz, Centre set at 160 Hz
  Band 3 150-2.5KHz, Centre set at 500Hz
  Band 4 450-8KHz, Centre set at 1.6KHz
  Band 5 1KHz-20KHz Centre set at 5KHz
  Band 6 Centre set at 10KHz
• Size 6.6 cm x 30 cm x 24 cm (including knobs)
  Weight 2.41kg