This amp has been used but not abused as you can see in the pics. The only fault, other than some minor scuffs, is that the amp knobs are a bit sticky as the rubber is breaking down. They still function as they should.

The Behringer iNUKE 3000 is a 3,000-watt power amp.

It weighs less than 7 pounds,  Class-D technology, and the specs noted are:  power outputs of 2 x 1500 watts at 2 ohms, 2 x 880 watts at 4 ohms, and a 3000-watt bridged mode at 4 ohms. It features independent channel protection, built-in crossovers, and combo XLR/1/4" inputs.  

You can use it in Stereo, Mono, or Bridged Mode.

• Power output: 2 x 1500W @ 2 Ohms, 2 x 880W @ 4 Ohms, 3000W bridged @ 4 Ohms 
• Frequency response: 20−20,000Hz20 minus 20 comma 000 cap H z20−20,000𝐻𝑧 (-1.0 dB) 
• Signal-to-noise ratio: >100dBis greater than 100 d cap B>100𝑑𝐵 
• Total harmonic distortion (THD): <0.2%is less than 0.2 %<0.2% 
• Technology: High-Density Class-D technology 
• Limiters: \"Zero-Attack\" limiters for overload protection 
• Crossover: Built-in subwoofer/satellite crossover 

• Inputs: 2 x Combo XLR / 1/4" TRS inputs 
• Outputs: 2 x Professional twist-lock speaker outputs 
• Controls: Illuminated, detented gain controls, power switch 
• Indicators: 4-segment signal and limit LEDs for each channel 
• Mode switch: Stereo, mono, or bridged modes  
• Dimensions: 2 rack spaces (18-15/16\"W x 3-3/4\"H x 11-1/4\"D)  
• Comes with the Original box and Power Chord. No manual but it’s pretty self explanatory.

Local pickup only