Sennheiser EW-DX EM 4 DANTE (R1-9) Wireless Receiver *USA Small Business*

Sennheiser EW-DX EM 4 DANTE (R1-9) Wireless Receiver

The Sennheiser EW-DX EM 4 DANTE (R1-9) Wireless Receiver is built for reliable wireless audio in busy live, studio, and event setups. It handles four wireless channels in one rack unit, making it a smart choice when you need a clean and organized system. With simple controls, strong signal protection, and flexible network options, it gives you the freedom to focus on the performance instead of your equipment.

Sennheiser EW-DX EM 4 DANTE (R1-9) Wireless Receiver Review

This full rack receiver supports up to 88 MHz of switching bandwidth and uses Sennheiser's Performance Audio Codec for low 1.9 ms latency and a 144 dB input dynamic range. It can manage up to 146 channels in Standard Mode or up to 293 channels in Link Density Mode. Dante connectivity, AES 256 encryption, four flexible network ports, and an integrated antenna splitter make it especially useful for larger wireless systems. The built in AutoScan feature also helps find suitable frequencies without requiring advanced RF knowledge.

Sennheiser EW-DX EM 4 DANTE (R1-9) Wireless Receiver Features

• Four wireless channels in one full size rack receiver
• Quick frequency scanning helps find clear channels
• Low delay keeps voices and instruments feeling natural
• Strong security helps protect your wireless signals
• Bluetooth control works from up to 82 feet away
• Easy to read OLED screen with simple controls

Sennheiser EW-DX EM 4 DANTE (R1-9) Wireless Receiver Specs

• Dimensions 19 x 1.73 x 14.66 inches
• Frequency range 520.000 to 607.800 MHz
• Wireless latency 1.9 ms
• Audio output 2 x 70 mW at 32 ohms
• Maximum power consumption 37 W
• AES 256 encryption and Dante Media Encryption
• Four network ports with flexible Control and Dante configurations
• Internal power supply with IEC connection
• Up to 88 MHz switching bandwidth
• Up to 293 channels with 300 kHz channel spacing
• Up to 146 channels with 600 kHz channel spacing