HK Audio Elements Line Bass PA System

HK Line Bass line array PA speaker system.

This listing is for one system - there is another for sale in a separate listing. This system is in excellent condition with no issues and is priced at under half the cost of new.

Includes;

• 1 E 110SUB AS 1200W powered Sub
• 1 E110SUB passive sub
• 2 E835 mid-high line arrays
• Covers for both subs
• Case/bag for the 2 tops
• Extension pole for when using only one top
• Speakon cable to connect the 2 subs
  

This is an exceptionally flexible system that can be set up in several configurations and is very easy and fast to set up.

- 1 sub + 1 mid/high line array tops on an extension pole

- 1 sub + 2 mid/high line array tops

- 2 subs + 2 mid/high line arrays tops

The E 110 SUB AS provides power to the passive sub and 2 tops via a dual amplifier delivering 1200 wats RMS (most portable systems advertise larger peak/transient watt values, not RMS). This is a strong system, and when 2 of these are used in tandem, it makes for a very capable, full range PA (see listing for a second identical system here on Reverb). I have gigged this system in a variety of venues and never lacked for power - also been told multiple times that the system sounds great. Its ability to throw clear sound deep into a room or far from stage outdoors is impressive.

Additional info:
An E835 passive mid/high column can handle 300W RMS and features, as its name implies, eight 3.5” broadband drivers that cover the frequency range from 140Hz to 20kHz. The E110 Sub AS active system subwoofer derives its name from its single 10” driver and the cabinet also contains the 2 x 600W fully-protected Class D amplifiers that power the system. A rear-mounted control panel carries all the necessary controls and input and output connectors. Assembling the system is a simple task, made easier by HK Audio’s E-Connect locking interconnect system in which a cylindrical tube on the bottom of the E835 slots and locks into a matching receptacle on either the top of another E835 or on the top (or side) of a E110 Sub AS. Plastic wedges are provided that can be used to lock the E835 to each other and to the E110 Sub AS in order to ensure that the two mid/high units are correctly aligned for maximum efficiency.

In terms of I/O, the rear-mounted control panel carries not only the single Input (a jack/XLR combi connector that can be set to either -10dB or +4db input level) and a Through XLR that allows you to daisy-chain systems together, but also a pair of Speakon outputs from the power amplifiers, one of which connects to further mid/high speakers and the other to a further sub. One of the features of the Elements system is that it contains various accessories that allow you to physically position your particular combination of tops and subs in various different ways. One really useful accessory is a floor-standing base that connects to the E110 Sub AS’s Speakon and also acts as a E-Connect mount for the E835, allowing you to position the mid/high units away from the sub.

The audio controls set the Bass Gain (the volume level of the sub) and the Mid/High Filter matches the frequency response of the active electronics to the number of connected Mid/High units.

The Line Base system delivers the excellent audio performance that characterises HK Audio’s Element series of products. Using the Bass Gain, you can set the Line Base up perfectly for music playback, speech, live sound and DJ/club use. The system beams the sound over a much longer distance than the significantly wider horizontal dispersion that is more commonly found in this type of “single top plus sub” system.

The HK Audio Line Base Single system is a good-looking, flexible, long-throw active loudspeaker system that delivers a heavyweight 1,200W RMS performance from a compact and relatively lightweight form factor. Designed with long-throw applications in larger venues in mind, a pair of these systems would certainly do just that in delivering their 2.400W RMS to the audience. In smaller venues where coverage is a primary consideration, you could potentially either angle the two E835 enclosures slightly or position them on their optional floor-standing bases to give you the required coverage. .