Effectrode Glass-A - Class A Triode Buffer GL-1A

Effectrode Glass-A Triode Buffer 

Löse mein Homestudio auf und

verkaufe hier den Effectrode Glass A Triode Tube Buffer inklusive dem Effectrode Netzteil 12VDC / 1,5A. Habe viele Buffer Pedale ausprobiert, aber der Glass A, als erstes Pedal in der Effektkette, schlägt alle um Längen.

Das Pedal ist in sehr gutem Zustand und funktioniert einwandfrei.

The Glass A model GL-1A triode buffer is specially designed to do just one thing very, very well: buffer the output signal from any musical instrument fitted with high impedance pickups or piezo transducer.

Description

This little green wonder is the world’s smallest vacuum tube buffer pedal. Within its tiny diecast enclosure is a NOS MIL Spec Sylvania Pencil Tube operating at 300V. Being all-tube means the Glass-A can quite literally handle any large signal levels and transients you throw at it. It can handle signal levels of 50V peak-to-peak without introducing distortion or nasty sonic artefacts. So high output humbucker and peizo pickups, line level, active 5-string bass guitar, NS Stick, and even “difficult” instruments with fast transients, such as lutes, harpsichords and hammered dulcimers are not a problem. Oh, and the Glass-A also works as a t Buffer to drive long cables and effect pedal input stages to prevent loading, which dulls and degrades the instrument’s tone.

The  Glass A Triode Buffer is built on a custom designed circuit board. The copper tracks are plated with pure silver, which is the best of all electrical conductors and superior even to gold. Additionally, the fibre glass board is coloured black and coated with a high-grade transparent solder resist for a truely distinctive and classy appearance.

FEATURES

• All Tube: 100% pure analogue vacuum tube audio path operating at amp plate voltages ensures the GL-1A buffer has phenomenal headroom and very quiet, natural sound reproduction.
• Frequency Response: Essentially flat between 5Hz-100KHz ±0.1dB. Lower -3dB break frequency is below 2Hz. Upper -3dB break frequency is above 200KHz.
• Class-A operation: Pure class-A operation ensures unmatched detail and resolution. Caution! This little pedal runs hot!
• Input impedance: Greater than 1MΩ.
• Output impedance: Less than 500Ω.
• Fitted with vintage tube: Each GL-1A buffer is fitted with a hand-selected Sylvania 6111 pencil tube.
• True Bypass Switching: Automatically defaults to bypass when power is removed.
• Includes 12VDC Wall-Wart: High quality low-noise switched mode power supply operating from 100-240VAC mains input. Supplied with various adapter plugs to facilitate connection to mains outlets in other countries. Compatible with all Effectrode pedals.