Furman M-10Lx E Power Conditioner with Lights

The Furman M-10Lx E is a 10A power conditioner with a total of 11 outlets. The M-10x E offers standard level surge suppression, standard level EMI/ RFI filtration, an LED protection OK indicator, front panel retractable lights with a front panel mounted dimmer control, and a robust steel chassis.

The Furman M-10Lx E is a low-cost AC power solution and light dimmer for any rack mount system. Install an M-10Lx E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load. The M-10Lx E features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.

Furman M-10Lx E Features

• Noise Filtration: AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
• Surge Protection: Spike & surge protection ensures equipment stays safe and your power stays clean
• 11 Total Outlets: 10 rear panel outlets and 1 front panel convenience outlet
• 10 Amp Rating: 10 amp rating, with circuit breaker
• "Protection OK" Indicator: Front panel indicator LED lets you know that your equipment is being protected
• Front Panel Pull-out Lights: Two retractable LED light fixtures with dimmer control for convenient rack illumination

Specifications

• Maximum Output Current: 10 amps
• Line Cord: 1.5 meter, removable, IEC C-13 female to Schuko male
• Lamps: LED
• Operating Voltage: 230VAC 50Hz
• Spike Protection Mode: Line to neutral
• Energy Dissipation: 305 joules
• Peak Impulse Current: 12,000 amps
• Maximum Continuous Operating Voltage: 650 Volts
• Noise Attenuation: Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz
• Dimensions: 1.75” H x 19” W x 7.5” D
• Weight: 2.3 kg.
• Safety Agency Listing: CE
• Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.