The Voodoo Lab Pedal Power 3 is a lightweight, high-current isolated supply with a hybrid DC transformer design that combines linear regulation with organic and polymer filtering for zero-noise operation. It runs on 100-240VAC for international touring and properly powers everything from sensitive vintage stomps to modern high-current DSP pedals without the guesswork of mismatched wall warts.

Eight galvanically isolated outputs eliminate ground hum and unwanted interaction between pedals. Six deliver 9V at up to 500 mA; two are switchable between 9V and 12V when a pedal needs the extra headroom. Optional voltage-doubler cables combine outputs for 18V or 24V pedals so you do not need a second supply for a handful of high-voltage units.

Expansion

Two X-LINK ports expand the system with Pedal Power X4 or X8 units using a single host AC connection, or feed high-current 12V devices from the shared X-LINK current budget. That keeps cable clutter down on travel boards while preserving full isolation on every pedal output.

Specifications

• Outputs: 8 isolated (6x 9V 500 mA, 2x 9V/12V 500 mA)
• Design: Hybrid DC transformer, linear regulation, multi-pole filtering
• Input: IEC, 100-240VAC 50/60 Hz
• Expansion: 2x X-LINK ports
• 18V/24V: Via optional voltage doubler cable
• Dimensions: 6 x 3.5 x 1.5" (152 x 89 x 38 mm)
• Weight: 0.9 lb (0.41 kg)

In the Box

• Pedal Power 3
• PPPK-8 standard polarity DC cable pack
• Detachable IEC power cord