Genelec 3440A Smart IP PoE Subwoofer (White)

Overview

The Genelec 3440A is a Smart IP subwoofer powered over Ethernet, built to extend Genelec 4400 series Smart IP systems down to 35 Hz (-6 dB). One CAT cable carries PoE+ or PoE power, Dante or AES67 audio and control, and a balanced Euroblock input accepts analogue line audio too. Its 6.5 in driver sits inside a cavity in the MDF cabinet that raises efficiency and protects the cone. Power stored in the supply delivers 106 dB short-term SPL from 40 to 85 Hz at 1 m. The 3440A stands upright or on its side, and the optional 3440-400B bracket mounts it on a wall or ceiling.

Key Features

• Single-cable install: PoE+ or PoE power, audio-over-IP and management share one CAT cable up to 100 m long.
• Dante and AES67 input: Plays Dante and AES67 streams at 32 to 96 kHz and 16 to 24 bit, using one channel or the sum of two, and can sum in the analogue input.
• Bass management: Smart IP Manager sets the crossover from 50 to 120 Hz in 5 Hz steps, adds a matching high-pass to the main speakers and aligns delay and level.
• Cavity-loaded driver: The front-loaded driver cavity boosts efficiency and attenuates distortion products. The reflex ports have radiused exits to prevent chuffing.
• Stored power for peaks: The internal power supply stores energy for bass peaks and reaches 106 dB short-term SPL on PoE+.
• Flexible placement: Upright on the floor, flat on its side with the base pads moved, or on a wall or ceiling with the 3440-400B mount. Four M6 thread inserts are provided.
• Intelligent Signal Sensing: ISS drops the subwoofer to a 4 W standby when no audio is present and wakes it on an incoming stream or an API command.
• Hardwearing finish: Rounded corners and a textured surface in black or white.

Specifications

• Type: Active Smart IP PoE subwoofer
• Driver: 165 mm (6.5 in) cone
• Amplifier: 70 W Class D (short-term)
• Frequency response (-6 dB): 35 - 120 Hz
• Max short-term SPL (40 - 85 Hz, 1 m, PoE+): ≥106 dB
• Max long-term SPL (1 m, PoE+): ≥101 dB
• Self-generated noise (1 m, A-weighted): ≤5 dB
• Bass management crossover: 50 - 120 Hz in 5 Hz steps
• Network / audio input: 1 x RJ45, 100BASE-TX
• Audio-over-IP formats: Dante, AES67
• Analogue input: 3-pin Euroblock, balanced, 10 kOhm
• Analogue input level for 100 dB SPL at 1 m: -6 dBu
• Max analogue input: 24 dBu
• Room EQ: 20 parametric filters, sensitivity -60 to 0 dB, delay 0 - 98 ms
• Power: PoE+ (IEEE 802.3at) or PoE (IEEE 802.3af)
• Power consumption: Idle 5 W, ISS standby 4 W
• Max CAT cable length: 100 m (333 ft)
• Enclosure: MDF, reflex ports
• Mounting: 4 x M6 thread inserts, max screw length 20 mm
• Dimensions (H x W x D): 475 x 475 x 220 mm (without pads)
• Weight: 14.5 kg (32 lb)
• Finish: White
• Genelec order code: 3440AW

In the Box

• 3440A Smart IP subwoofer
• Euroblock connector for analogue audio (fitted)