Genelec 4030C 2-Way Active Installation Speaker (White)

Overview

The Genelec 4030C is a compact 2-way active loudspeaker for small to medium commercial installations such as clubs, bars, restaurants, boardrooms, museums and theatres. A 5 in cone woofer and a 3/4 in metal dome tweeter each have their own 50 W Class D amplifier. The amplifiers, active crossover and driver protection sit inside the die-cast aluminium enclosure, so no external power amplifier is needed. Rear-panel switches adjust the bass and treble to suit the room and the mounting position.

Key Features

• Active design: Drivers, power amplifiers, active crossover filters and protection circuitry are all inside the speaker.
• MDE enclosure: The die-cast aluminium Minimum Diffraction Enclosure is shaped to reduce edge diffraction.
• DCW waveguide: Genelec's Directivity Control Waveguide controls dispersion and reduces early reflections from nearby surfaces.
• Room response controls: Treble Tilt adds 2 dB above 5 kHz, Bass Tilt cuts below 2 kHz by 2, 4 or 6 dB, and Bass Roll-Off cuts 4 dB at 55 Hz.
• Level control: A rear-panel control with 40 dB of continuous range matches the speaker to the source.
• Daisy-chaining: The balanced 3-pin Euroblock plug takes a second cable that carries the signal on to the next speaker.
• ISS Autostart: The speaker drops to standby, typically under 0.5 W, some time after playback ends and wakes when signal returns. A rear switch turns the function off.
• Mounting options: A 3/8 in UNC thread on the base fits a standard microphone stand, and two M6x10 mm rear threads take Omnimount size 20.5 brackets or the included keyhole wall mount.
• Finishes: Black, white or RAW, which is unpainted recycled aluminium with a slightly different look on every enclosure.

Specifications

• Type: 2-way active loudspeaker, bi-amplified
• Woofer: 130 mm (5 in) cone
• Tweeter: 19 mm (3/4 in) metal dome
• Frequency response (±2 dB): 54 Hz - 20 kHz
• Low cutoff (-6 dB): 47 Hz
• High cutoff (-6 dB): 25 kHz
• Max short-term SPL (1 m): ≥104 dB
• Max long-term SPL (1 m): ≥96 dB
• Max peak SPL per pair (1 m): ≥110 dB
• Self-generated noise (1 m, A-weighted): ≤5 dB
• Harmonic distortion (85 dB SPL, 1 m): ≤2% (50-100 Hz), ≤0.5% (above 100 Hz)
• Crossover frequency: 3.0 kHz
• Amplifiers: 50 W bass + 50 W treble, Class D
• Amplifier distortion at nominal output: <0.05% THD
• Input: Balanced, 3-pin Euroblock, 10 kOhm
• Input level for 100 dB SPL at 1 m: -6 dBu
• Level control range: -40 dB, continuously variable
• Treble Tilt: 0 to +2 dB @ 15 kHz
• Bass Tilt: 0 to -6 dB @ 100 Hz in 2 dB steps
• Bass Roll-Off: -4 dB @ 55 Hz
• Mains voltage: 100-240 V AC, 50/60 Hz
• Power consumption: ≤0.5 W standby (ISS), ≤3 W idle, 60 W full output
• Enclosure: Die-cast aluminium, reflex port
• Dimensions (H x W x D): 285 x 189 x 178 mm (11 1/4 x 7 7/16 x 7 1/16 in)
• Weight: 4.9 kg (10.8 lb)
• Operating environment: Indoor, 15 to 35 °C, 20 to 90% relative humidity
• Finish: White

In the Box

• 4030C installation speaker
• 3-position terminal block (audio input plug)
• Mains cable, 1.8 m
• Simple bracket (keyhole wall mount)
• Mounting screw set
• Operating manual