Relab Color Drive (Download) <br>

Saturation Built From a Real-Time Circuit

Color Drive doesn’t stack algorithms or approximate “warmth.” It solves the Relab 176 tube stage, with the input transformer, 6BC8 variable-gain tube, calibration bias, and output transformer, as a single, living circuit.

That’s why it behaves like hardware: every move changes the way the whole system responds.

It’s hardware logic, in software form.

If you’ve been waiting for a saturator that responds like real hardware, this is the one that finally does it.

Drive - The Heart of the Tube Stage

When you increase the Drive you’re not just adding “more effect”- you’re pushing an accurate 6BC8 tube (and switchable output transformer) model inside a complete analog circuit.

Harmonics build naturally, transients round in a controlled way, and the signal picks up that understated weight and glow you normally only get from real hardware.

Switch in the Transformer, Change the Harmonics

Switching to transformer coupling inserts the Relab 176’s output transformer back into the signal path, completing the full analog chain.

With Calibration centered, the stage produces mostly odd-order harmonics, adding focus, punch, and that familiar hardware solidity to a mix.

Bias the Tube & Tune the Harmonics

Calibration adjusts the tube’s bias point, letting you introduce just the right amount of even-order harmonics when you need warmth or contour.

Especially when paired with the output transformer, it becomes a precise way to shape the harmonic mix. You can create subtle, musical shifts that give you real control over how the color sits in a track.

Modern Controls Shape What the Circuit Hears

These controls let you decide how the signal enters the tube stage, not just how much.

The low-end crossover can route the deep bass around the drive circuit so you keep all the weight without muddying the harmonics.

And the pre/post tilt or high-shelf emphasis filters let you steer exactly which frequencies push the tube harder.

Together they give you precise, musical control over the harmonic profile before any Drive is added.

Requirements:

mac:
cpu: Apple Silicon M1 or newer
ram: 8
disk: 0
version: macOS 12 Monterey or higher
internet_required: False
support: 64_bit
plugins: VST-3,AU,AAX

windows:
cpu: Intel Core i7 (8th-gen+) or AMD Ryzen 5 (3000-series+) with AVX2 support
ram: 8
disk: 0
version: Windows 10 and up (64-bit)
internet_required: False
support: 64_bit
plugins: VST-3,AAX

Licensing:

Features:

Hardware-Accurate Saturation Behavior Every control affects the whole system, so tone, dynamics, and harmonics interact like real analog hardware.
Musical, Responsive Harmonics Harmonics evolve naturally with signal level—never static—preserving realistic density, tone, and transient shape.
Drive Control Based on a True Tube Stage Increasing Drive pushes an accurate 6BC8 tube model, producing controlled transient rounding, harmonic weight, and authentic tube glow.
Switchable Output Transformer Engaging the transformer completes the analog chain, emphasizing odd-order harmonics for added punch, focus, and solidity.
Tube Bias (Calibration) Control Adjusts the tube’s bias point to blend in even-order harmonics, allowing precise shaping from clean focus to warm contour.
Advanced Input Shaping Controls Low-end crossover preserves bass clarity, while tilt and high-shelf filters let you choose which frequencies drive the tube harder for targeted coloration.
Real-Time Circuit Modeling The entire Relab 176 tube stage (input transformer, 6BC8 tube, bias, output transformer) is solved as one continuous circuit, not stacked algorithms.