3 DIFFERENT PHASING MODES LET THIS PHASER CREATE A MULTITUDE OF EFFECTS

A new generation RPH-10 Phaser with 12-stage phase-shift circuitry and recording studio quality sound. According to the mode selected, 3 completely different effects can be produced. Mode I (6 stages) is for soft and light phase-shifting, while Model II (10 stages) creates deeper phase-shifting all the way from the lows to the highs. Mode III (12 stages) is for when a sharp and intense phasing effect is required. Apart from the basic RATE, DEPTH and FEEDBACK controls, the RPH-10 is also equipped with a MANUAL control to adjust the center frequency around which the phase shifting occurs. With this control, it becomes easy to find a setting that is suitable for a particular instrument. A custom IC, newly-developed, is utilized in the phase-shift circuitry to produce phase-shifting which is exceptionally smooth. Although phasers usually tend to get noisy as the number of stages increases, the RPH-10’s built-in noise reduction system ensures a wonderfully clear sound.

CONTROLS

MODE: For selecting one of the following 3 modes. Mode I provides 6-stage shifting for a mild phasing effect, while Mode II offers a deeper effect due to 10-stage shifting. Mode III is for very intense and powerful 12-stage phasing.

MANUAL: This will select the center frequency of the phase-shifting and helps to match the phase-shifting to the type of instrument used.

RATE: For adjusting the speed of the phasing effect. Turn clockwise for increased speed and counterclockwise to slow it down.

DEPTH: For adjusting the depth of the phasing effect. Turn clockwise for a deeper-sounding effect and counterclockwise for shallower phase-shifting.

FEEDBACK: For controlling the amount of feedback signal to create a stronger phasing effect.

POINT OF PERFORMANCE

Having 3 different modes, the RPH-10 allows the user to produce a very wide array of effects, from the sharp and intense to a soft and light effect. Effectively employing these 3 modes will allow the RPH-10 to display its full potential. In Fig. 1 you see the setting utilizing Mode I to produce a phasing effect which is shallow and natural-sounding. An ideal setting for electric piano, one that delivers an open, wide type of sound with a slight emphasis on the highs, you ‘II find it often used by Richard Tee. Mode II is used in Fig. 2 to create deeper phase shifting, an effect that really puts synthesizer lead solos in the spotlight It’s also effective for guitar backing where muting is used. By setting RATE to a slightly lower position, you have the perfect sound for reggae cutting. With Mode III, a deep and very intense phasing sound is effected by taking full advantage of the 12-stage phase circuitry. It’s a setting that really adds sparkle to synthesized strings with the RATE control lowered just a bit.

TRICK & SHOCK

Using two RPH-10 units, you can produce true stereo phasing with the modulation of the two units being mixed. First, connect the 2 units through the MODULATION BUS jack. Set the RATE lower r and the DEPTH greater on the first unit. For the second unit, use opposite settings. The result is the complex modulation effect as shown in the Fig. below.

[Condition]

Used(Very Good) / perfect working condition

International Buyers - Please Note:

Import duties, taxes and charges are not included in the item price or shipping charges.

These charges are the buyer's responsibility.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

For US customers: 

Shipping costs include all handling fees, duties, and customs charges. There are no additional costs. You can order as normal.Please note that items over $2,500 will still be subject to customs duties upon receipt.