Irmo, SC, United States
About this listing
The Shure KSM32/SL Condenser Microphone is a premium side-address cardioid condenser microphone for highly critical studio recording and live sound productions. With an extremely flat, extended frequency response, the KSM32/SL provides transparent reproduction of the original sound source. A 15 dB attenuation switch allows the mic to handle the high SPLs associated with drums, percussion, and ensembles. The Shure KSM32/SL Condenser Microphone delivers a smooth, neutral sound reproduction with full character and can be used on an almost endless list of applications, some of which include vocals, acoustic and wind instruments, low frequency instruments such as double bass and kick drum and various overhead miking applications. The Shure KSM32/SL is equally at home on the stage or in the studio. Performance CharacteristicsYou can expect a smooth, neutral reproduction with full character. The Shure KSM32/SL Condenser microphone is a clear, accurate and detailed mic with a full and extended bass response, although the inclusion of both gentle and steep high-pass filters allows the bass end to be tamed very effectively if need be. Performance characteristics also include very low self noise and high input SPL capability. Shure KSM32/SL Condenser Microphone Applications Brass and woodwind instruments Orchestras, choirs, and wind ensembles Overhead miking of drums and percussion instruments Close-miking of acoustic instruments such as piano, guitar, violins, drums, and percussion Low-frequency instruments such as double bass and kick drum Electric guitar and bass amplifiers Vocals and speech Room ambience Shure KSM32/SL Condenser Microphone Features Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across the full frequency range Embossed, high-compliance diaphragm provides extended low frequency response and consistent off-axis rejection Ultra-thin, 2.5 µm 24-karat gold-layered, low-mass Mylar® diaphragm for superior transient response 15 dB attenuation switch for handling extremely high SPLs Variable low-frequency filter provides greater flexibility to counteract proximity effect or to reduce mechanical rumble Integrated three-stage "pop" protection grille reduces plosives and other breath noise Cardioid polar pattern reduces the pickup of unwanted sounds Internal shock mount reduces handling and stand noise Superior build construction withstands daily use on the stage or in the studio Shure KSM32/SL Condenser Microphone Specifications Cartridge Type: Electret Condenser Polar Pattern: Cardioid Frequency Response: 20 to 20,000 Hz Output Impedance: 150 Ohm Sensitivity (Open Circuit Voltage, @ 1 kHz, Typical): –36 dBV/Pa (16.0 mV) Maximum SPL 1 kHz at 1% THD: PAD ON: 2500 Ohm Load: 154 dB 1000 Ohm Load: 148 dB PAD OFF: 2500 Ohm Load: 139 dB 1000 Ohm Load: 133 dB Signal-to-Noise Ratio: 81 dB Dynamic Range @ 1 kHz: 2500 Ohm Load: 126 dB 1000 Ohm Load: 119 dB Clipping Level (20 Hz to 20 kHz, 1% THD): 2500 Ohm Load: 9.0 dBV 1000 Ohm Load: 3.0 dBV Self Noise (Equivalent SPL, A-Weighted, Typical): 13.0 dB SPL-A Common Mode Rejection (20 to 20,000 kHz): = 50 dB Attenuator Switch: 0, -15 dB Low-Frequency Filter Switch: Flat, –6 dB/Octave below 115 Hz, or –18 dB/Octave below 80 Hz Connector: Three-pin Professional Audio (XLR), Male, Balanced Polarity: Positive Pressure on Diaphragm Produces Positive Voltage on Pin 2 with Respect to Pin 3 Finish: Champaign Power Requirements: 11–52 V DC Phantom Power (IEC-61938), 4.7 mA Net Weight: 490 g (17 oz.) Shure KSM32/SL Condenser Microphone Includes 1x Shure KSM32/SL Condenser Microphone 1x Red Shure Microphone Protective Pouch/Bag 1x Shure A32SM Elastic Suspension Shock Mount for KSM32 1x Shure A32M ShureLock® Stand Mount 1x Shure Carry Case (Fits microphone, shock mount and stand mount) 1x Manufacturer’s Warranty
Price$719
Free Shipping
Free Shipping
from Irmo, SC
14-Day Return Policy
Enjoy peace of mind with your new gear
