If you’re looking for compact dimensions and balanced sound with crystal-clear HF and expressiveness in the mid and lower frequency ranges without compromise, the FO 10 is a perfect choice.

The combination of a 10 woofer with a 1.75 Voice coil and the rotatable constant directivity horn from the CONTOUR X series, which was developed for the rough and tumble of touring, with a powerful 1 compression driver, results in an assertive full-range solution for speech and music. With a dispersion angle of 80° x 60°, the horn can be rotated by 90°, allowing the speaker to be used upright, lying on its side, or suspended on its side with optimum dispersion in any situation. The FO 10 is an assertive system speaker that works perfectly with the S118 or S218 subwoofers, delivering rich and precise mids.

Specifications:

• Concept Passive 2-way mid/high unit.
• Cabinet principle: Bass reflex.
• Power handling RMS: 300 W.
• Power handling program: 600 W.
• Power handling peak: 1200 W.
• Nominal impedance: 8 ohms (According to EN 60268-5, minimum value not less than 80% of nominal value).
• Max. SPL average: 119 dB (1 m, 10% THD @ 80 Hz - 20 kHz, EN 60268-21, full space).
• Max. SPL peak: 123 dB (1 m, 10% THD @ 1.3 kHz, full space).
• Sensitivity: 91 dB (1 W/1 m, 80 Hz - 20 kHz, full space).
• Crossover frequency: 2.9 kHz.
• Frequency range -6 dB: 71 Hz - 20 kHz.
• Frequency range -10 dB: 67 Hz - 20 kHz.
• Dispersion angle -6 dB (horizontal x vertical): 80° x 60°.
• Ball impact resistance: Certified according to DIN 18032-3 (MPA University Stuttgart).
• IP protection class: Not specified.
• Low/mid frequency driver: 1 x 10" Sica cone speaker with ferrite magnet and 2" voice coil.
• High-frequency driver: 1 x 1" Sica compression driver with ferrite magnet and 1" voice coil.
• Crossover: High pass 18 dB/octave, low pass 18 dB/octave.
• High-frequency protection circuit: Self-healing PTC fuse.
• Horn: BEM-optimized constant directivity horn, rotatable.
• Input: 1 x NL4 Speakon.
• Output/parallel output: 1 x NL4 Speakon.
• Pin assignment: 1+/- input/parallel output, 2+/- wired through.
• Compatible DSP presets: Lab.Gruppen IPX, LEA Professional Sharkware, Biamp Tesira, BSS, Lab. gruppen Lake, Linea Research, Marani, Powersoft, QSC Q-SYS, Symetrix.
• Frequency response equalization filter specifications: Available in tabular form without limiter specifications.
• Mounting points: 2 x M8 lateral, 2 x M8 bottom/lid, 1 x M8 rear, 4 x M4 rear.
• Cabinet material: MDF.
• Cabinet surface: 1-component acrylic enamel.
• Color options: Jet black (RAL 9005), signal white (RAL 9003), or special catalog colors.
• Front grille: Steel front grille with anticorrosive coating, acoustic foam backing, and additional steel reinforcements.