This amp sounds amazing and is in really great condition. Im only selling it because I have to many amplifiers and just thinning out the herd but everything works as it should. I'll also send (not in pictures) power cable, a speaker cable to connect the cabinet and the head and also the Mosfet boost pedal that came with it as well. If you have any questions then just let me know. Now here is some info on the amps from Suhr.

Suhr Badger 30 Head:

POWER: Power Scaling provides the tonal response of a high wattage amp on 10, at manageable volumes. Power controls the voltage that feeds the output section and in turn, the wattage. As you lower the voltage of the power section you are reducing the amount of signal it can handle before clipping the output section. To compensate for this we use the “Drive” control so you can easily scale down to 1 watt without losing tone & feel.

DRIVE: Feeds the input to the power section. With Power at 10 it acts as a master volume. As a rule of thumb, when you turn down the Power always set the Drive control within 2 numbers of the Power setting. If you set the drive lower than the power it will sound brighter, like a “master volume” amp.

GAIN: Controls the amount of preamp gain by controlling 2 cascading gain stages simultaneously to drive the input stage.

TONE CONTROLS: Bass, Middle and Treble tone controls for each channel are post-gain and passive cut-style. We recommend starting around 5 and dialing to taste. As you increase Gain and/or Drive we recommend dialing back the Bass to retain clarity and definition in the low-end.

EFFECTS LOOP: Every Suhr Badger includes a buffered all tube effects loop that works equally well with pedals or line level rack gear..

Cabinet:

The Suhr 1×12 speaker cabinet comes loaded with your choice of a Warehouse Veteran 30 or Celestion Vintage 30 speaker, is capable of handling 60 watts, and is a great fit for our Badger and Corso amplifiers.