Fryette Amplification PS-100

This Fryette Amplification PS-100 is an unused open box, with photos.

Features:

- Preserves tube amplifier tone at any volume setting down to whisper level

- Preserves and enhances the dynamic feel and speaker response at any volume

- Maintains natural speaker/power amplifier interactive behavior

- Two sets of remote foot-switchable Volume, Presence and Depth controls for maximum live performance versatility

- Post-distortion Foot-Switchable Effects Loop provides a 100% analog signal path

- Balanced XLR and Unbalanced 1/4” Adjustable Line Outputs for direct recording or live performance signal processing

- True Impedance Matching, including 2/4, 8 or 16 ohms for both the amplifier and cabinet to optimize sonic performance while preventing damage to your amplifier

- Remote bypass function using the Power Station Remote accessory (sold separately)

- Completely safe for any tube amplifier

- A powerful re-amping tool

- As a re-amper, the Power Station breathes new life and utility into your favorite gear. Now any small amp, preamp or modeler can cut a live gig with a full band

- Crank a mini amp to the threshold of destruction, then adjust the Power Station to preserve the original tone or create an entirely new identity for it

- Perfect as mono power amplifier for guitar preamps, floor preamps and modeling preamps

- Ideal as an effects power amp for a Wet/Dry amp rig or a monitor power amp for live modeling direct to FOH

- Great as a desktop power amp for adding tube power to direct recordings for any instrument or signal source

- Protect your delicate vintage mics by keeping speaker cabinet volume low in the studio

- No A/D/A conversion, therefore NO latency

- Silent Mode 

Specs:

- Output: 100W of pure tube power @ 4, 8 and16 ohms.

- Tubes: One 12AX7; two KT88 (Matched Pair).

- Power Input (Max continuous): 200W @ 2/4 Ohms; 150W @ 8 Ohms; 200W @16 Ohms

- Output Impedance: 2/4, 8 or 16 Ohms, selectable

- Load Amp Impedance: 2/4, 8 or 16 Ohms, selectable Can drive a 2 Ohm speaker load, using the 2/4 Ohm setting

- Active safety bypass feature: Disables internal power amp and maintains critical load on your amplifier if speaker output jack is accidently unplugged.

- Front panel controls: A/B Select switch, Hi/Lo Input Level switch, High frequency response switch - Flat, Brite, Edge, Low frequency response switch - Flat, Warm, Deep, Volume, Presence and Depth controls, Bypass (standby) switch, Power switch.

- Rear panel features: Amp In, Amplifier Impedance select – 2/4, 8 or 16 Ohms, Balanced Line Out XLR with Level Control, Unbalanced 1/4” Line Out, FX Send, FX Return, FX Level Switch, Unbalanced 1/4” Line In, Speaker Impedance select 2/4, 8 or 16 Ohms, Speaker Out, Remote Footswitch jack, Ground Lift, Mains Fuse, AC Input

- Optional: Carry bag and rack kits are available and sold separately

- Dimensions: 14 x 2.75 x 9 in. 

- Weight: 16 lbs.