Good day from db Hifi in Daytona beach Florida.
My vintage HiFi journey began in 1972– when today’s vintage HiFi was contemporary. As a wide eyed twelve-year-old visiting (as often as possible) the local HiFi shops to ogle at Marantz, Sansui, Pioneer, JBL, Ohm AR, and Luxman gear. Budget realities resulted in the purchase of a used reciever from Radio Shack and speakers from local dump. However, an oath was made, and honoured. Fast forward decades later, I have the good fortune of acquiring multiple pieces of vintage HiFi gear on a monthly basis – comparing, testing and Restoring them. I’m now committed to sharing the love and learning of vintage HiFi.
Here is another Vintage item for you from;
Pioneer 1970s Era.
PL-41 Vintage Deck.
I’m offering a Vintage survivor of the 70s. It’s in Incredible condition 9.5 on a 1-10 scale. 1 imperfection in front where the Pioneer logo was attached it’s been repaired and covered with wooden veneer. Look closely at pictures and you decide. 1 scratch on dust cover.
It was just cleaned and serviced with a new belt for the lucky new owner.
I would suggest a newer set of (low capacitance)
Gold input cables. Comes with a original head shell only. I had the tone arm rewired and installed new updated shielded RCA outputs.
So it’s basically rebuilt and guaranteed to work better than new!
This is one of Pioneer’s better contributions to the turntable market. Built in the late 60′ and early 70’s it’s the Pioneer PL-41. At the time it was their top of the line turntable. The PL-41’s utilizes a belt drive. It’s a simple table that’s easy to operate. Not to mention A bulletproof rugged design that has already lasted decades!
Compatible to AR. Or Thorens. Priced at $795
And up to $2000 each
The PL-41 is built like a tank and, when set up properly, is a proven solid performer.
Some stats:
Speeds: 33 and 45rpm
Wow and flutter: 0.08%
Rumble: 50dB
Platter: 310mm, 2.2kg, aluminium alloy die-cast.
Tonearm: static balance.
Frequency response: 15 to 21,000Hz
Channel separation: more than 30dB
Output: 5mV
Stylus pressure: 2 to 3g
Dimensions: 508 x 406 x 191mm.
Weight: 10.5kg.
There’s a head shell but No cartridge included it’s
A personal choice on Vintage turntables.
Terms and Conditions;
Updated September 2021
There are no returns on Vintage or Antique equipment whatsoever.
All sales are final. No warranty or guarantees.
Seller is not responsible for shifting loads or any damage during shipping or delivery. I use Reverb safe Ship for both our protection. The greatest care is taken in packing your Item. Items are bubble wrapped and
Double boxed when needed. Check my feedback I work hard to please my cherished customers. Thank you!
My vintage HiFi journey began in 1972– when today’s vintage HiFi was contemporary. As a wide eyed twelve-year-old visiting (as often as possible) the local HiFi shops to ogle at Marantz, Sansui, Pioneer, JBL, Ohm AR, and Luxman gear. Budget realities resulted in the purchase of a used reciever from Radio Shack and speakers from local dump. However, an oath was made, and honoured. Fast forward decades later, I have the good fortune of acquiring multiple pieces of vintage HiFi gear on a monthly basis – comparing, testing and Restoring them. I’m now committed to sharing the love and learning of vintage HiFi.
Here is another Vintage item for you from;
Pioneer 1970s Era.
PL-41 Vintage Deck.
I’m offering a Vintage survivor of the 70s. It’s in Incredible condition 9.5 on a 1-10 scale. 1 imperfection in front where the Pioneer logo was attached it’s been repaired and covered with wooden veneer. Look closely at pictures and you decide. 1 scratch on dust cover.
It was just cleaned and serviced with a new belt for the lucky new owner.
I would suggest a newer set of (low capacitance)
Gold input cables. Comes with a original head shell only. I had the tone arm rewired and installed new updated shielded RCA outputs.
So it’s basically rebuilt and guaranteed to work better than new!
This is one of Pioneer’s better contributions to the turntable market. Built in the late 60′ and early 70’s it’s the Pioneer PL-41. At the time it was their top of the line turntable. The PL-41’s utilizes a belt drive. It’s a simple table that’s easy to operate. Not to mention A bulletproof rugged design that has already lasted decades!
Compatible to AR. Or Thorens. Priced at $795
And up to $2000 each
The PL-41 is built like a tank and, when set up properly, is a proven solid performer.
Some stats:
Speeds: 33 and 45rpm
Wow and flutter: 0.08%
Rumble: 50dB
Platter: 310mm, 2.2kg, aluminium alloy die-cast.
Tonearm: static balance.
Frequency response: 15 to 21,000Hz
Channel separation: more than 30dB
Output: 5mV
Stylus pressure: 2 to 3g
Dimensions: 508 x 406 x 191mm.
Weight: 10.5kg.
There’s a head shell but No cartridge included it’s
A personal choice on Vintage turntables.
Terms and Conditions;
Updated September 2021
There are no returns on Vintage or Antique equipment whatsoever.
All sales are final. No warranty or guarantees.
Seller is not responsible for shifting loads or any damage during shipping or delivery. I use Reverb safe Ship for both our protection. The greatest care is taken in packing your Item. Items are bubble wrapped and
Double boxed when needed. Check my feedback I work hard to please my cherished customers. Thank you!
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
Listed | 3 years ago |
Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
Brand | |
Model |
|
Finish |
|
Categories | |
Year |
|
Made In |
|