This is a complete PA package that gets you up and running without hunting down cables, stands, or wireless mics separately. The PAIO15 pairs a 1000-watt program power active speaker with a matching passive cab, connected by the included 20-foot Speakon cable. You're looking at dual 15-inch drivers with 30 oz magnets handling everything from club gigs to outdoor festivals.

The active speaker does all the heavy lifting — Class A/B amplifier, built-in Bluetooth streaming, USB/SD media playback, and FM radio. XLR, RCA, and 3.5mm inputs cover your bases whether you're running a wireless mic, DJ controller, or just need to plug in someone's phone for background music. The included VHF wireless mic operates at 260.3 MHz and connects automatically to the built-in receiver.

Real-world coverage hits about 200 people indoors or 100-150 outdoors, depending on your venue acoustics and how loud your crowd gets. The 45Hz-18kHz response and 98 dB sensitivity mean you'll get clean vocals and enough low-end punch for most music without needing a separate sub. The injection-molded polypropylene cabinets can handle the load-in abuse, and at 26 pounds for the active and 22 pounds for the passive, you won't throw out your back loading these.

Setup is straightforward: power to the active speaker, Speakon cable between cabs, plug in your sources. The included heavy-duty stands adjust from 30¾" to 44¼" to get your speakers at ear level. The 2-band EQ on the active speaker lets you dial in your sound without needing an external mixer for simple applications.

Bottom line: This is a solid entry-level PA system for mobile DJs, karaoke hosts, small band rehearsals, and church sound where you need both live reinforcement and music playback in one package.

Technical Specifications

• Power (Peak): 2000 Watts
• Power (Program): 1000 Watts
• Power (RMS): 500 Watts
• Amplifier Type: Class A/B
• Woofer: 15" with 30 oz magnet, 2" voice coil
• HF Driver: 1" tweeter
• Frequency Response: 45Hz - 18kHz
• Sensitivity: 98 dB
• Impedance: 4 Ohms
• Inputs: XLR, RCA, 3.5mm
• Connectivity: Bluetooth, USB 2.0, SD/MMC, FM radio
• Onboard Mixer: 2-band EQ
• Cabinet: Injection molded polypropylene with side handle
• Dimensions: 16" x 13.5" x 26" per cabinet
• Weight: Active: 26.2 lbs, Passive: 22.3 lbs
• What's in Box: 2 speakers (1 active, 1 passive), speaker stands, wireless mic, 20' Speakon cable, power cord, Bluetooth remote
• Warranty: One Year
• Recommended For: Mobile DJs, karaoke, small venues, church sound

Frequently Asked Questions

How many people can this system actually cover?

You're looking at about 200 people indoors or 100-150 outdoors, depending on your venue acoustics and crowd energy. If you're playing to a rowdy crowd or dealing with high ceilings and hard surfaces, that number drops. For larger gigs or challenging rooms, you'll want to step up to higher wattage or add a subwoofer.

Do I need any additional cables or gear to get this running?

Nope — everything you need is in the box. Connect the speakers with the included Speakon cable, plug the active speaker into power, and you're ready to go. Use XLR for mics or mixers, RCA for DJ gear, or 3.5mm for phones and laptops. The wireless mic connects automatically.

How's the low-end response without a subwoofer?

The dual 15s give you solid bass response down to 45Hz, which handles most music and speech applications just fine. But if you're spinning bass-heavy electronic music, hip-hop, or want that extra thump for dance events, you'll eventually want to add a powered sub to round out the bottom end.

Can I control music playback remotely?

Yes, the included Bluetooth remote lets you navigate tracks on USB drives, SD cards, or FM radio from across the room. For Bluetooth streaming from your phone, you'll use your device's controls as usual. The remote is handy when you're away from the speakers during breaks or between sets.