Handmade by Jim Bergantino and crew in his Jersey shop, this is the most powerful powered bass cab I have ever used, but if you still need more volume I would recommend using a 1x12 8ohm extension cab to get the full 4ohm load out of this beauty. Just add your favorite bass preamp and you’re good to go. This is the standard version of the IP112, not the ER version
Comes with original power cord. I’m throwing the XLR to 1/4“ adapter in as a bonus.
The Bergantino IP112 is a 500-watt powered bass speaker cabinet with a built-in internal amplifier and custom digital signal processing (DSP).
Key Specifications
- Speaker Configuration: 1x12" cast frame woofer (with an 80oz magnet, 2.5" voice coil, and vented pole piece) paired with a high-intelligibility bullet tweeter. [1]
- Amplifier Power: 500 watts RMS at 8 ohms (internal cab alone); scales up to 1000 watts at 4 ohms when paired with an extension cabinet like the HT/EX112ER. [1, 2]
- Frequency Response: 40Hz – 18kHz. [1]
- Input Sensitivity: 0.70 volts (-3dBV). [1]
- Input Impedance: 39k ohms. [1]
- Crossover: Custom phase-coherent crossover with a tweeter level control. [1]
- DSP Features: Custom factory EQ curve (switchable in/out) with built-in compression and limiting. [1]
- Physical Dimensions: 15" H x 17.5" W x 13" D. [1]
- Weight: 46 lbs. [1]
- Inputs/Outputs: 3-pole XLR input (with an included XLR-to-1/4" cable adapter) and an external speaker output. [1]
| Listed | 7 hours ago |
|---|---|
| Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
| Brand | |
| Model |
|
| Categories | |
| Made In |
|
| Number of Inputs |
|
| Power Tube Type |
|
| Speaker Configuration |
|
| Electronics |
|
| Reverb |
|
| Color Family |
|
| Number of Channels |
|
| Output Power (Watts) |
|
Product safety information may be available here.









