Hand Wired Clone AB763 Deluxe Reverb Head Heyboer OT Premium Components

Hand wired clone of a 20 Watt Deluxe Reverb AB763 head with 8 ohm speaker output. Built in my home shop with quality components used throughout such as: Vishay coupling Capacitors, Vishay and Stackpole resistors, Switchcraft jacks, Belton sockets, Killer sounding Heyboer paper interleaved output transformer, Pacific Red series filter choke, Power transformer and reverb driver, Gavitt cloth covered solid wire, MOD filter capacitors, MOD Spring Reverb tank (Full sized, 2 spring, long decay) and full sized Alpha pots just to name a few. Head cab is home built as well with 1" solid, knot free pine and 1/2" cabinet grade maple ply for the back and baffle and wrapped in Mojotone Fender "Bronco"s black tolex. Great care and attention given to lead dress/layout and grounding scheme for the lowest noise floor. The amp is stock AB763 with the following exceptions: Reservoir cap is 40uf, the rest are 20uf. which firms up low end at volume , I lowered the B+ feeding the reverb driver from 420v to around 380v for better sounding reverb AND longer tube life 1 ohm bias resistors on 6V6 cathodes, 4.7uf (in place of 25uf) cathode bypass caps stages to trim bass below 80hz to increase headroom a bit and be more friendly with closed back cabinets and a shunt cap on the reverb return jack to lower HF noise/oscilation . Amp will ship with new JJ 12ax7 preamp tubes, a NOS USA made 12at7's in the reverb driver position and Phase Inverter and a matched pair of JJ 6V6S Power tubes, the amp is already burned in and biased so it is plug and play ready upon arrival. Included a sound clip recorded only iPhone. Cab is a 2x10 with Jupiter ceramics and guitar is an LP USA Traditional with pearly gates no pedals.Thanks for looking and feel free to ask any questions! Reasonable offers considered. Thanks!!