Specs:

• Microphone Type: Solid-state large-diaphragm (wide-diaphragm) FET condenser
• Polar Patterns: Cardioid, Omnidirectional, and Figure-8 (selectable via switch)
• Frequency Response: 20 Hz – 20,000 Hz
• Sensitivity: -36 dB (15 mV/Pa @ 1kHz = 0dB)
• Impedance: < 200 ohms
• Maximum SPL: 130 dB
• Equivalent Noise Level (Self-Noise): < 17 dB (A-weighted)
• Signal-to-Noise Ratio: > 73–76+ dB
• Switches / Controls: -10 dB attenuation pad and low-frequency roll-off (high-pass filter)
• Phantom Power Required: 9V to 48V phantom power
• Connector: 3-pin XLR
• Dimensions: 2 in x 6.5 in (50 mm x 165 mm)
• Weight: 16.6 oz (470 g)
• Included Accessories: Shockmount, foam windsack/pop filter, and a carry case

Common Applications

• Studio and background vocals
• Guitar and bass speaker cabinets
• Acoustic guitars and upright basses
• Brass, woodwinds, and strings
• Choirs and live instrument recording

*IMPORTANT*
If you reside in the United States and place an order with us, please be aware that customs fees or import duties may be applied upon delivery. These charges are regulated by your government and are beyond our control. We encourage you to check your local customs regulations for more information before completing your purchase.

If you have questions or want more information feel free to message us.

If you want shipping to the US or a more specific shipping cost message us or send us your zipcode so we can look into it.

**Service offert en Francais**