ADAM Audio Sub10 PRO 10" Active Subwoofer

ADAM Audio Sub10 PRO 10" Active Subwoofer

Combining advanced DSP with powerful low-frequency reproduction, the ADAM Audio Sub10 PRO provides a solid foundation for stereo and mulitchannel monitoring. As part of ADAM's latest generation of networked subwoofers, it pairs a high-excursion 10” woofer with an FEA-optimized bass port and a high-performance Class D amplifier to deliver tightly controlled bass.

ADAM CONTROL

ADAM Control is the calibration and management platform for all networked ADAM Audio products. The extensive tuning and phase controls of the Sub10 PRO can be attenuated remotely and in real time over Ethernet. ADAM Control is available to download free of charge for Windows and MacOS. Once downloaded and installed, you can control multiple subwoofers and A Series monitors at once, precisely adjusting equalization, and delay settings from various listening positions in your studio space. ADAM Control also facilitates firmware updates, allowing new features to be added to the Sub10 PRO over time.

AUTOMATED ROOM CORRECTION VIA SONARWORKS

The Sub10 PRO is designed to complement ADAM Audio’s Sonarworks-ready, award-winning line of A Series monitors. It features a platform on the subwoofer’s DSP that can host advanced filters created in SoundID Reference. Using Sonarworks and a measurement mic, you can calibrate stereo and multichannel A Series and Sub10 PRO systems with ease.

HIGH-PERFORMANCE WOOFER

The heart of the Sub10 Pro is its high-excursion, low-distortion woofer. Made from a fibre-reinforced paper material, the cone further strengthened by an elasticated rubber surround that permits considerable excursion while maintaining its mechanical design. The precision geometry of the ferrite magnet system is completed by demodulation rings which stabilize voice coil inductance. The considered design of the woofer extends to the advanced ventilation of all moving parts to minimize unwanted noise.

DIGITAL CONNECTIVITY

AES3 is a professional standard for transmitting digital audio between interfaces and loudspeakers. Both the AES3 input and output connectors on the Sub10 PRO can carry 2 channels of digital audio up to 24-bit resolution and sample rates of 96 kHZ. By maintaining signal in the digital domain fewer conversions are required and higher quality audio can be transmitted over longer distances.

POWERFUL AMPLIFICATION AND UNFALTERING DSP

The Sub10 PRO features a Class D amplifier that drives the woofer in a highly efficient manner at all listening levels. A smartly designed limiter works in tandem with the amp so the woofer can be driven to its extremes while always protecting the circuitry and mechanical components. The amplifier and limiter are managed by DSP-based electronics which benefit from consistent crossovers, filters, and equalization. Signal conversion is handled by audiophile-grade converters, carefully selected by ADAM Audio to deliver outstanding performance.

FEA-OPTIMIZED BASS PORT

Finite Element Analysis is a computer-based simulator that was used to model airflow over the Sub8 PRO’s bass port. By creating thousands of samples of its surface and aggregating how forces affect it, the most efficient curvature, flaring, and effective length of the port could be calculated. This allowed us to achieve more consistent air speeds across the port length, which greatly reduces turbulence and results in impressive SPLs.

MULTICHANNEL READY

Alongside the Sonarworks platform for multichannel calibration, the Sub10 PRO offers two operational modes that were designed for immersive audio. LFE mode features a specifically designed 120 Hz cutoff that conforms to Dolby’s advice for LFE channels in Atmos systems. Wide mode allows the subwoofer to play full range, offering the maximum amount of flexibility for bass management elsewhere in the chain.

BERLIN INDUSTRIAL DESIGN, ROBUST CABINET AND GRILLE

The Sub10 PRO features classic ADAM Audio design with a speckled finish to the bass port and matching curvature throughout. The cabinet is constructed from thick, vibration-resistant MDF wood that contributes to reducing unwanted resonances. There is additional bracing to support the port, and the woofer features a steel grille which protects the woofer when placed under desks.

ADAM AUDIO SUB10 PRO FEATURES:

• Subwoofer with high-excursion 10" woofer with a fibre-reinforced paper cone and an elasticated rubber surround, built for deep, low-distortion bass
• Class D amplifier with a smart limiter, so the woofer can be pushed hard while the circuitry and mechanical parts stay protected
• FEA-optimized bass port that keeps air speed even along the port, cutting turbulence and allowing high SPLs
• Advanced DSP and audiophile-grade converters for consistent crossovers, filtering and EQ
• ADAM Control software (free for Windows and macOS) to adjust EQ, phase and delay over Ethernet in real time, across multiple subs and A Series monitors
• Sonarworks SoundID Reference integration for automated room correction of stereo and multichannel systems
• AES3 digital input and output: 2 channels at up to 24-bit/96 kHz, so fewer conversions are needed and signal quality holds over long cable runs
• Built for immersive audio: an LFE mode with a 120 Hz cutoff that follows Dolby’s Atmos guidance, and a Wide mode that plays full range for flexible bass management
• Firmware updates through ADAM Control, so new features can be added over time
• Robust Berlin-designed cabinet made of thick, vibration-resistant MDF, with internal port bracing and a steel grille that protects the woofer under a desk