LOOP-MASTER PEDALS BLACKSTAR 2-BUTTON AMP FOOTSWITCH

A compact two-button latching footswitch for compatible Blackstar amplifiers that use a standard 1/4" TRS footswitch connection.

The Loop-Master Pedals Blackstar Footswitch provides two independent amp-control functions through a single TRS cable while taking up very little pedalboard space.

On compatible Blackstar amps, the two switches can control functions such as Channel and Reverb, with the exact functions determined by the amplifier.

Two switches. One TRS connection. No power required.

WHAT IT DOES

• Two-button latching amp footswitch

• Two independent controls

• Single 1/4" TRS connection

• Compact alternative to larger factory footswitches

• Completely passive operation

• No battery or power supply required

• Heavy-duty latching footswitches

• Premium TRS jack

• Rugged aluminum enclosure

• Handcrafted in the USA by Loop-Master Pedals

BLACKSTAR DEBUT 100R / 100RH

The Blackstar Debut 100R and Debut 100RH use a two-button latching footswitch for:

• Switch 1 – Clean / Overdrive Channel

• Switch 2 – Reverb On / Off

This makes the Loop-Master Pedals controller a compact pedalboard-friendly option for controlling both functions from a single TRS connection.

OTHER COMPATIBLE BLACKSTAR AMPS

This controller can also be used with other compatible Blackstar amplifiers that accept a standard two-button latching TRS footswitch.

Depending on the amplifier, the two switches may control functions such as:

• Clean / Overdrive

• Channel switching

• Reverb On / Off

• Voice selection

• Boost

• Other amp-specific functions

The connected amplifier determines the actual function of each switch.

COMPACT DESIGN

At only 3.63" × 1.5", this controller takes up very little pedalboard space.

It's ideal when you want two amp-control functions without dedicating a large section of your pedalboard to a conventional factory footswitch.

Great for:

• Compact pedalboards

• Crowded pedalboards

• Fly rigs

• Backup rigs

• Keeping your original factory footswitch at home

• Integrating amp switching directly into your pedalboard

HOW IT WORKS

Connect the Loop-Master Pedals footswitch to the compatible Blackstar amplifier using a standard 1/4" stereo/TRS cable.

The two latching switches independently control the two functions carried through the TRS connection.

Press a switch and it changes state.

Press it again and it returns to the previous state.

No programming or setup is required in the footswitch itself.

LATCHING SWITCHING

This controller uses two LATCHING footswitches.

It is not a momentary controller.

Your Blackstar amplifier must support standard two-button latching switching through its 1/4" footswitch connection.

DIMENSIONS

• 3.63" × 1.5" × 1.06"

• 9.22 × 3.81 × 2.69 cm

• 92.2 × 38.1 × 26.9 mm

POWER

No power required

CONNECTION

• 1 x 1/4" TRS control jack

A standard stereo/TRS cable is required.

TRS cable is not included.

CONSTRUCTION

• Two heavy-duty latching footswitches

• Premium TRS jack

• Rugged aluminum enclosure

• Completely passive operation

• Compact pedalboard-friendly footprint

• Handcrafted in the USA by Loop-Master Pedals

IMPORTANT COMPATIBILITY NOTE

This footswitch is designed for compatible Blackstar amplifiers that use a standard two-button latching 1/4" footswitch connection.

Blackstar has used several different footswitch systems across its amplifier lineup, so this is NOT a universal replacement for every Blackstar amplifier or Blackstar factory footswitch.

It is not intended to replace proprietary multi-function foot controllers or amplifiers requiring a different switching system.

If you're unsure whether your amplifier is compatible, contact us with the exact Blackstar model before ordering.

This is a Loop-Master Pedals product and is not manufactured by or affiliated with Blackstar.

TRS cable not included.