Loop-Master Pedals JHS Red Remote Alternative Footswitch (non-led) – Morning Glory / SuperBolt / Kilt

LOOP-MASTER PEDALS JHS RED REMOTE ALTERNATIVE FOOTSWITCH

A compact, rugged alternative to the JHS Red Remote for compatible JHS pedals.

The Loop-Master Pedals Red Remote Alternative gives you convenient external footswitch control of the onboard remote-switchable function found on select JHS pedals.

Instead of reaching down to operate the pedal's onboard toggle switch, connect this remote footswitch and put that function right at your feet.

Perfect for accessing alternate gain, boost, voice or other remote-controlled functions on compatible JHS pedals during a performance.

One switch. One standard 1/4" cable. No power required.

WHAT IT DOES

• Alternative remote footswitch for compatible JHS pedals

• Remotely controls the pedal's onboard switchable function

• Lets you access alternate sounds without reaching down to the pedal

• Uses a standard 1/4" instrument cable

• Completely passive operation

• No battery or power supply required

• Compact pedalboard-friendly enclosure

• Premium jack

• Handcrafted in the USA by Loop-Master Pedals

COMPATIBLE JHS PEDALS

Designed for JHS pedals equipped with Red Remote functionality, including:

• Morning Glory V4

• SuperBolt V2

• Twin Twelve V2

• Double Barrel V4

• Kilt V2

• Switchback

The exact function controlled by the remote depends on the JHS pedal being used.

WHY USE A REMOTE FOOTSWITCH?

Several compatible JHS pedals provide an additional sound or function that can be accessed remotely.

Without a remote footswitch, changing that function may require reaching down and operating the pedal itself.

Connect the Loop-Master Pedals remote and that function becomes accessible with your foot.

This is especially useful when you want to change sounds in the middle of a song without bending down or adding another complete effects pedal to your signal chain.

SIMPLE HOOKUP

Connect the Loop-Master Pedals remote footswitch to the REMOTE input of your compatible JHS pedal using a standard 1/4" mono instrument/patch cable.

That's it.

No TRS cable.

No MIDI.

No external power.

The connected JHS pedal handles the remote-control function.

PASSIVE OPERATION

No power required.

This is a completely passive remote controller with no battery or external power supply needed.

COMPACT PEDALBOARD FOOTPRINT

The small enclosure makes it easy to place the remote exactly where you want it.

Put your JHS pedal farther back on the board while keeping its remote function conveniently located along the front row.

It's also a great way to add another foot-accessible sound without giving up much pedalboard space.

CONNECTION

• 1 x 1/4" remote footswitch jack

Uses a standard mono 1/4" instrument/patch cable between the remote and compatible JHS pedal.

Cable is not included.

DIMENSIONS

• 1.9" × 1.9" × 1.06"

• 4.8 × 4.8 × 2.7 cm

• 48 × 48 × 27 mm

POWER

No power required

CONSTRUCTION

• Heavy-duty footswitch

• Premium jack

• Rugged aluminum enclosure

• Completely passive operation

• Compact pedalboard-friendly footprint

• Handcrafted in the USA by Loop-Master Pedals

IMPORTANT

This is a Loop-Master Pedals product designed as an alternative remote footswitch for compatible JHS pedals.

It is not manufactured by or affiliated with JHS Pedals.

Your JHS pedal must support the external Red Remote function for this controller to operate.

Always verify that your specific pedal and version supports the JHS Red Remote before ordering.

Standard 1/4" instrument/patch cable required.

Cable not included.