Irmo, SC, Stati Uniti
Informazioni su questo annuncio
The AEA N22 Ribbon Microphone is a modern near-field and active ribbon mic with a rugged lightweight design, extended top-end clarity, and reduced proximity effect making it perfect for close miking of instruments.
The AEA N22 Ribbon Microphone is a modern ribbon mic that challenges expectations of traditional ribbon technology and can reframe the way you record with ribbons. It delivers clarity and balance in frequency response, even when positioned just inches from the source, and can stand alone in a mix without the need for the blending additional mic signals due to its extended top-end.
A New ApproachThe AEA N22 Ribbon Microphone can be positioned inches away from an instrument and retain a balanced sound with extended top end while avoiding the room tone that can cause problems in smaller spaces or iso booths. This is what makes the AEA N22 special. It exhibits a high-frequency bump at 3kHz making it ideal for recording vocals, electric guitar, bass cabs, kick drum, acoustic guitar, and percussion. It is best to think of the AEA N22’s placement in terms of inches instead of feet. The AEA N22 Ribbon Microphone naturally reduces proximity effect while also avoiding the room tone that can cause problems in smaller spaces or iso booths. Naturally rolling off the low-end before it hits the ribbon creates a much different sound than using electronic equalization to roll off the low-end in post.
AEA N22 Ribbon Microphone Features
Extended top end with a ribbon’s classic warmth
Near-field ribbon mic with reduced proximity effect
Balanced frequency response at 1 to 18 inches from the source
Compact, lightweight design with rugged durability
Active electronics and custom transformer optimized for all preamps
Made in the U.S.A.
AEA N22 Ribbon Microphone Specifications
Operating Principle: Pressure Gradient Transducer
Directional Pattern: Bidirectional
Frequency Range: < 20 Hz to > 20 kHz
Maximum SPL: 141 dB SPL (1% Third Harmonic > 1 kHz)
Sensitivity: 8.3 mV/Pa (at 1 kHz, No Load)
Output Impedance: 92 Ω Broadband
Recommended Load Impedance: 1.0 kΩ or Greater
Phantom Power: P48 Phantom Power, 7 mA
Polarity: Pin 2 High for Positive Pressure at the Front of the Microphone
Polar Response: Native Bidirectional, Figure-of-8 Pattern
Horizontal: Up to 90 dB Rejection at Right Angles to the Front / Back Axis
Vertical: Level Changes with Angle of Incidence, but Frequency Response is Consistent
Transducer Element Material: Pure aluminum Corrugated Ribbon
Thickness: 1.8 μm
Width: 0.185 in (4.7 mm)
Length: 2.35 in (59.7 mm)
Mic Dimensions:
Height: 8.83 in (22.5 cm)
Width: 1.62 in (11.7 cm)
Depth: 1.62 in (9.5 cm)
Weight: 12 oz (335 g)
Connector: XLR-3M
AEA N22 Ribbon Microphone Includes
N22 Ribbon Microphone
Storage Case
Microphone Stand Clip
Custom Protective Mic Sleeve
User Manual
Manufacturer Warranty
PrezzoA$1,793.95
+ A$148.12 Spedizione
A$89.76 con spedizione combinata
Politica per i resi entro 14 giorni
Concediti il massimo della tranquillità con il tuo nuovo strumento
