Designed for both Stereo and Mid-Side mastering applications, this equalizer combines the musical character of the legendary Neumann W492 with a high-pass filter (18 dB/octave) based on the renowned Neumann HT75. Works both with 230VAC and 110VAC.

Featuring two relay-switchable hand-wound output transformers (crafted in-house), contributing gentle harmonic coloration while preserving clarity and detail. Rotary and toggle switches only, with no potentiometers used.

Built with high-quality components, all hand-matched to a 0.1% tolerance between the left and right EQ channels, ensuring identical EQ response between channels while maintaining a stable and accurate stereo image.


  • Band Gain control is calibrated in precise 0.5 dB increments.
    A 3-position multiplier band gain switch provides three modes:
    ±5 dB mastering mode (0.5 dB step)
    ±10 dB (X2) mix mode (1 dB step)
    ±15 dB (X3) tracking / sound design mode (1.5 dB step).


  • In M/S mode, the left channel is assigned to MID and the right channel is assigned to SIDE.
  • True hard bypass via relay routes the input directly to the output, fully bypassing all circuitry when engaged.
  • Individual bypass for each EQ band and the HP filter, with independent ON/OFF switching for fast A/B comparison and maximum operational flexibility.
  • Integrated stepped input trim control provides gain staging and accurate level adjustment before the EQ section.
  • Nichicon Muse capacitors are used in the audio signal path for high transparency, and consistent, neutral signal reproduction.
  • The HP filter uses Siemens NOS yellow MKL capacitors, delivering a clean and natural low-end with smooth, transparent filtering and tight, controlled sub frequencies.
  • The low shelf uses large Siemens NOS Styroflex capacitors, delivering a tight and well-defined low-end with fast transient response, no smearing, and natural clarity without muddiness.
  • The low-mid bell combines Siemens NOS yellow MKL and Siemens NOS Styroflex capacitors, delivering a rich and controlled midrange with fullness, clarity, and analog character.
  • The high-mid bell uses Siemens NOS Styroflex capacitors, delivering a smooth and detailed upper midrange with clear presence, controlled forward character, and precise transient response.
  • The high shelf uses Siemens NOS Styroflex capacitors, delivering a smooth, airy and refined top end with extended high-frequency detail, natural openness, and a clean, non-fatiguing response without harshness.

Note that the video on the listing is not of the exact unit being sold. It serves as a demonstration of the sound and capabilities of SW592. You can find another useful demo video on the same YouTube channel.

Questo articolo è venduto "Come da descrizione”

Questo articolo è venduto "Come da descrizione" e non può essere restituito a meno che non arrivi in condizioni diverse da come è stato descritto o fotografato. Gli articoli devono essere restituiti nelle condizioni originali in cui sono stati spediti, con tutti gli imballi originali.Scopri di più.

Annunci simili in promozione













Pubblicato7 giorni fa
CondizioneEccellente (Usato)
Gli articoli "Eccellenti" sono quasi completamente privi di difetti e altri difetti visivi e sono stati suonati o utilizzati con la massima cura.Scopri di più
Marchio
  • SW592
Modello
  • Mastering EQ
Finish
  • Hammer Finish
Categorie
Anno
  • 2026

Le informazioni sulla sicurezza del prodotto sono disponibili qui.

Fertah Gear

Helsinki, Finlandia
Iscrizione a Reverb::2017

Protezione di Reverb

Resi semplici, transazioni sicure, assistenza di persone in carne e ossa

Scopri di più

Checkout sicuro

Reverb Gives

Con i tuoi acquisti dai un contributo ai programmi musicali rivolti ai giovani, aiutandoli a ricevere gli strumenti di cui hanno bisogno.

Ops, forse hai dimenticato qualcosa. Verifica i campi evidenziati in rosso.