Brantford, Kanada
Zu diesem Inserat
The
Empress buffer was designed to be the complete I/O interface for the
pedal board, while maintaining the highest fidelity to your guitar's
signal.
Signal loss due to long, un-buffered cable runs is an issue that has
plagued guitar players for decades. The primary goal of the buffer is to
eliminate this signal loss, ensuring that your tone is unchanged by
your cables.
Additionally, all the connectivity of your pedal board is
consolidated to make set up quick and easy. The buffer+ also has a very
handy set of features that make life just a little better. Noise
filters, input pads, switchable clean boost and input loading are all
powerful tools available on the buffer+
All Analog Signal Path - no digitals in here!Small Size - The enclosure measures approximately 4.5" by
2.5" by 1.5", which is delightfully small when considering all the
features packed into this unit.Tuner Out - Separate tuner output keeps your tuner out of the audio path.Complete I/O - All the connections to your pedalboard consolidated in one place. Makes setup and teardown quick and easy.Switchable Boost - Dial in up to 30dB of clean boost and switch on and off with the soft touch foot switch.Tuner Mute - Hold the footswitch for a second and mute the amp output for tuning.Noise Filters - Similar to Dolby's noise filter technology,
choose between 2 different noise filters to remove any unwanted noise
from your effects chain.Input Pad - Pad or boost the input by 3dB. Great for matching
outputs of different guitars, reducing really hot active pickup signal
or boosting the signal to your effects to improve signal to noise ratio.Input Loading - Load down your pickups a little, a lot or not at all. It's up to you.Empress Buffer+ User Manual
PreisC$242.92
+ C$20.74 Versand
Nur 1 übrig
Hol es dir, bevor es weg ist
14 Tage Rückgaberecht
Genieße Sorgenfreiheit mit deinem neuen Equipment
