Freiburg, Allemagne
À propos de cette annonce
The long-reach end of Sennheiser’s classic MKH shotgunThe MKH 816 T is the extended interference-tube, 12-volt T-powered version of the famous MKH design philosophy — built for maximum directionality, extreme reach, and precise off-axis rejection. Developed for film, broadcast, and field recording, it was intended for situations where distance, noise control, and intelligibility were non-negotiable.OPTICAL CONDITIONvery good condition. The long interference tube and slotted section show no dents, bends, or visible wear. Finish is uniform, with sharp, intact slot edgesTECHNICAL CONDITIONFully tested, stable, and operating exactly as intended. Output is clean and quiet, with No instability, dropouts, or noise issues .THIS ITEM INCLUDESOriginal wooden presentation caseBUILD & DESIGNThe MKH 816 T uses an extra-long interference-tube body, significantly longer than the MKH 416, designed to achieve extremely narrow lobar directivity. The extended slot pattern along the tube enhances phase cancellation for off-axis sound, resulting in exceptional side and rear rejection.CapsuleRF-biased (high-frequency biased) condenser capsuleSupercardioid / Lobar polar patternSennheiser’s RF condenser principle makes the MKH 816 T highly resistant to humidity and temperature changes — a key reason these microphones became trusted tools for outdoor and location recording.CircuitThe MKH 816 T operates on 12 V T-Power (Tonaderspeisung).Legacy powering system used in professional film and broadcast environments+12 V applied across pins 2 and 3No reference to ground, unlike phantom powerRequires a dedicated T-Power to P48 adapter for use with 48 vSennheiser produced T-powered and phantom-powered variants of the MKH series to match the requirements of professional recorders of the era, including Nagra and similar systems.TECHNICAL SPECIFICATIONSType: RF-biased condenserPolar Pattern: Supercardioid / LobarFrequency Response: 40 Hz – 20,000 HzSensitivity: Comparable to other MKH long-shotgun modelsImpedance: Approx. 200 ΩOutput: Balanced (12 V T-Power)FREQUENCY RESPONSEFrequency Response:40 Hz – 20,000 HzStrong presence emphasis in the upper midrange for long-distance intelligibilitySmooth, controlled high-frequency extension without excessive sharpnessLow-frequency attenuation below ~60–80 Hz to reduce handling noise and environmental rumbleSOUND CHARACTERISTICSThe Sennheiser MKH 816 T is all about reach and precision. Its long interference-tube design produces an exceptionally tight pickup pattern, making it highly effective for isolating distant sound sources in challenging environments. On-axis sound remains focused and articulate, while off-axis material is strongly attenuated, helping dialogue and targeted sources stay intelligible even in noisy or reflective spaces.The midrange is firm and forward, optimized for speech clarity and definition at a distance. High frequencies remain detailed and controlled, avoiding harshness while preserving intelligibility. The low end is restrained by design, contributing to clean results when used on booms or at long working distances.Usage examples:Long-reach boom microphone for film and broadcast dialogueOutdoor dialogue recording where distance and background rejection are criticalSpot microphone for distant acoustic sources or environmental detailSpecialised recording situations where extreme directionality or isolation is required - with mojoLove this item? Explore more! Check out our store for more amazing Microphones. You might discover a new favourite mic!
Prix€653.31
TVA incl.
+ €16 Expédition
€9 en cas d'expédition groupée
