• 10 A total load
• With 2-way LED rack lighting, dimmable and removable
• With SMP (Series Mode Protection), maintenance-free overvoltage protection
• Transient and overvoltage peaks are detected, absorbed and dissipated within <1 nanosecond with LIFT (Linear Filtering Technology)
• Ground-free noise attenuation (10 dB @10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz)
• With EVS (Automatic Extreme Voltage Shutdown) for switch-off/disconnection in the event of overvoltage
• Cleaned and fused voltage output via 10x rear and 1x front IEC 320 connections
• With central switch at the front, automatic circuit breaker can be reset at the rear
• Outputs are isolated to minimise interference/noise between connected devices
• Rear BNC connection with switch for optional gooseneck lamp (12 V/0.5 A)
• Protection OK and extreme voltage display for status function/protection mode
• Dimensions: 19", 1 U, installation depth 26.7 cm
• Weight: 6 kg

The Furman PL-8 C E Power Conditioner provides a central, protected power supply in the rack and supports low-interference operation of sensitive audio components. With its 19" design in 1U format, the device is suitable for studio, DJ and pro audio setups where protection, overview and reliable power distribution are required.

The most important features include SMP overvoltage protection, LiFT filtering and EVS shutdown. The concept is complemented by two dimmable rack lights and 11 IEC connections. This makes the PL-8 C E a powerful solution for anyone who wants to supply their rack equipment safely and at the same time equip it with practical features.