Köln, Alemania
Información sobre este anuncio
Switchable gain in two stages: +15dB or +30dB gainPerfect for quiet, passive microphonesInput impedance can be adjusted in 8 stages for a wide range of Pre ampsHigh-quality sound, consistently transparent/true to natureState-of-the-art components and high-grade FETs for high SNRAlso enables longer cable runsReduces susceptibility to HF interference, humming and humGold-plated XLR contactsRobust and "explosive" designRequires 48V phantom power for operationDoes not allow phantom power to pass through to the microphoneIdeally placed directly on the microphone (but after the cable also works)Two-stage amplification and switchable impedanceThe sE Electronics DM2 T.N.T is an active inline preamplifier. Compared to its little brother, the DM1, it offers switchable amplification from a moderate 15dB to an explosive 30dB and even less noise. Thanks to the variable input load, it gets the best out of the existing microphone.What can I use it for?The preamplifier is predestined for microphones that only have a low output level due to their design. This is particularly the case with large-diaphragm dynamic microphones such as the or , or ribbon microphones such as the or . As many microphone preamps do not provide sufficient gain for such microphones, the DM2 T.N.T is a good alternative to buying a new preamp with the appropriate gain reserves.Will my sound be ruined?The DM2 delivers a very low-noise and true-to-life signal. Of course, every link in the signal chain is always associated with some losses, but here sE Electronics has actually managed to bring a product onto the market that reduces signal losses to a minimum. So you get your additional gain without losing the special features of the microphone in question.
Precio original €144.38
7% de rebaja
Precio nuevo €135.23
Incl. IVA
+ €7.14 Envío
Gratis gastos de envío al combinar
Política de devoluciones de 30 días
Disfruta de tu nuevo equipo sin preocupaciones
