Klotz M4TM3-0030 Patch Cable 0,3m - Audio Cable

• Conductor construction: bare stranded copper wire, 28 x 0.10 mm
• Insulation: polyethylene (PE)
• Conductor arrangement: 2 cores + cotton threads stranded
• Shunt strand: tinned copper strand, 28 x 0.10 mm
• Winding: PET fleece
• Outer diameter: 4.6 mm
• Min. bending radius: 25 mm
• Operating temperature: -20 °C/+70 °C
• Conductor resistance: < 85 Ω/km
• Capacitance: core/core: 75 pF/m, core/screen: 130 pF/m
• Insulation resistance: > 0.1 GΩ x km

• Dielectric strength: 1 kVdc
• Insulation resistance: > 2 GΩ (initial)
• Cable diameter: 4 - 4.8 mm
• Lifetime: > 1000 mating cycles
• Contacts: Bronze (CuSn6) (tip)
• Housing: Polyamide (6 30% GR) (black)
• Insulation: Polyamide (PA 6.6 30 % GR)
• Standards compliance: MIL-P-642/13
• Solderability: Complies with IEC 68-2-20
• Temperature range: -20 °C to +65 °C
  

• Dielectric strength: 1.5 kVdc
• Insulation resistance: > 10 GΩ (initial)
• Lifetime: > 1000 mating cycles
• Bend protection: polyurethane
• Contacts: Brass (CuZn39Pb3)
• Housing: Zinc diecast (ZnAl4Cu1)
• Flammability: Polyamide (PA66)
• Standards compatibility: IEC 61076-2-103
• Protection class: IP 40
• Solderability: Complies with IEC 68-2-20
• Temperature range: -30 °C to +80 °C
  

The Klotz M4TM3-0030 patch cable with 0.3 m length in red is especially suitable for connecting external effect racks or balanced instruments and signal sources to professional TT patchbays. Numerous advantageous features make the professional cable a recommendable music accessory in every respect. It is made of the proven MY204 microphone cable and equipped with a Bantam miniature jack plug and a Neutrik three-pin XLR connector.

This patch and microphone cable is an extremely practical design due to its small outer diameter of only 4.6 mm. The resulting high flexibility facilitates cabling and makes it a good choice even when space is limited. Despite the slim design, the cable has an extremely stable construction. A tinned copper braided shield increases the tensile strength and, in combination with the symmetrical signal routing, reliably repels interference. A very low capacitance of only 75 pF/m is also a favorable feature.

Balanced transmission is required in the professional sector, for example in recording studios, as it ensures freedom from interference even over longer distances. Cables with balanced signal transmission have an additional useful signal-carrying conductor through which the same voltage is sent, but whose oscillations are mirror-inverted. Any interference thus has an even effect on the signal conductors. Since the useful signal consists of opposite-pole voltage values, the interference is practically cancelled out by difference formation.

The cable is rounded out by Neutrik connectors, which guarantee the company's usual quality.

The NP3TT-P-B bantam miniature jack plug is specifically designed for audio applications and is optimal for use with TT Patch panels. The three-pin NC3MXX-BAG XLR connector is a professional product of the XX series. Due to its metal housing, this is a particularly robust version whose elegant design is also visually convincing. An internal thread in the housing is protected against damage. If necessary, the XLR connector can be additionally color-coded by marking options. Various accessories available from MUSIC STORE professional can be used for this purpose:

In addition to their good performance, both connectors impress with the proven Neutrik cable strain relief as well as a robust ergonomic design. The slim shape is especially recommended for high mating density.

Every Klotz cable is manufactured in Germany and subjected to conscientious inspection. This ensures lasting quality and superior sound characteristics.