Irmo, SC, United States
About this listing
The Shure KSM137/SL Condenser Microphone is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels. The Shure KSM137/SL Condenser Microphone is a premium end-address cardioid instrument microphone engineered for highly critical studio recording and live sound productions. Its class A, discrete, transformerless preamplifier provides extremely natural response and transparent sound capture, and a three position switchable pad allows for handling of extremely high sound pressure levels. Versatile, durable, and precise, the Shure KSM137/SL is an outstanding microphone for both live and studio applications. The Shure KSM137/SL is used for close-miking the acoustic and electric instruments, drum overheads, brass/woodwind, ensembles, and even bass instruments such as double bass and kick drum. The Shure KSM137/SL is equally at home in the studio or in live applications. The Shure KSM137/SL Cardioid Instrument Microphone can withstand extremely high sound pressure levels (SPL). It has a high output level, low self noise and reproduces low frequency sounds exceptionally well. Shure KSM137/SL Condenser Microphone Applications Brass and woodwind instruments Orchestras, choirs, and wind ensembles Overhead miking of drums and percussion instruments Close-miking of acoustic instruments such as piano, guitar, violins, drums, and percussion Low-frequency instruments such as double bass and kick drum Electric guitar and bass amplifiers Vocals and speech Room ambience Shure KSM137/SL Condenser Microphone Features A highly consistent cardioid polar pattern Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic distortion Premium electronic components, including gold-plated internal and external connectors Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs) Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect Shure KSM137/SL Condenser Microphone Specifications Cartridge Type: Electret Condenser Polar Pattern: Cardioid Frequency Response: 20 to 20,000 Hz Output Impedance: 150 Ohm Sensitivity (Open Circuit Voltage, @ 1 kHz, Typical): –37 dBV/Pa (14.1 mV) Maximum SPL (1 kHz at 1% THD): PAD ON: 5000 Ohm Load: 170 dB 2500 Ohm Load: 164 dB 1000 Ohm Load: 159 dB PAD OFF: 5000 Ohm Load: 145 dB 2500 Ohm Load: 139 dB 1000 Ohm Load: 134 dB Signal-to-Noise Ratio: 80 dB Dynamic Range @ 1 kHz: 5000 Ohm Load: 131 dB 2500 Ohm Load: 125 dB 1000 Ohm Load: 120 dB Clipping Level (20 Hz to 20 kHz, 1% THD): 5000 Ohm Load: 15 dBV 2500 Ohm Load: 9 dBV 1000 Ohm Load: 3 dBV Self Noise (Equivalent SPL, A-Weighted, Typical): 14 dB SPL-A Common Mode Rejection (10 to 100,000 kHz): = 50 dB Attenuator Switch: 0, -15, -25 dB Low-Frequency Filter Switch: Flat, –6 dB/Octave Below 115 Hz, or –18 dB/Octave Below 80 Hz Connector: Three-pin Professional Audio (XLR), Male, Balanced Polarity: Positive Pressure on Diaphragm Produces Positive Voltage on Pin 2 with Respect to Pin 3 Finish: Champagne Power Requirements: 11–52 V DC Phantom Power (IEC-61938) 4.7 mA, Maximum Net Weight: 100 g (3.5 oz.) Shure KSM137/SL Condenser Microphone Includes 1 x Shure KSM137/SL Condenser Microphone 1 x Shure A100C Case 1 x Shure A100WS Windscreen 1 x Shure A57F Stand Adapter 2 Year Warranty
PriceA$577.30
+ A$146.92 Shipping
A$89.03 shipping when combined
14-Day Return Policy
Enjoy peace of mind with your new gear
