ADAM Audio T5V 5" Active Studio Monitor (Single)

Pineville, NC, United States

About this listing

Adam Audio T5V: Ribbon-Tweeter Studio Reference at Entry-Level Pricing The Adam Audio T5V is the 5-inch active nearfield monitor that brings Adam Audio's signature U-ART ribbon tweeter and HPS waveguide into a price class that historically forced producers to settle for dome tweeters and underpowered cabinets. Two-way bi-amplified design, 70 watts of Class D power, a polypropylene woofer with a rear-firing port, and dual XLR + RCA inputs make this the studio reference for the bedroom producer building their first real monitoring chain - and the upgrade path for anyone leaving consumer speakers and laptop drivers behind for the first time. U-ART Accelerating Ribbon Tweeter - Adam Audio Detail at T-Series Pricing The single feature that defines the T5V at this price is the U-ART (Accelerating Ribbon Technology) tweeter paired with HPS (High-frequency Propagation System) waveguide. Where competing monitors in the sub-$300 tier use soft dome or silk tweeters, Adam Audio puts a folded-ribbon driver here - the same family used in their higher-tier S-series studio monitors. The ribbon's low moving mass reproduces sibilance, breath, cymbal decay, and reverb tails with precision dome tweeters cannot match. The HPS waveguide controls dispersion so the high frequencies stay consistent off-axis - the mix sounds the same a few inches outside the sweet spot as it does dead center. Bi-Amped 70W Class D with DSP-Controlled Crossover at 3 kHz Each driver gets its own dedicated amplifier - 50 watts of Class D power drives the 5-inch polypropylene woofer, 20 watts drives the U-ART tweeter. The crossover is implemented in DSP at 3 kHz, eliminating analog component drift and keeping the imaging consistent over the monitor's lifetime. Frequency response stretches from 45 Hz to 25 kHz (-6 dB), with maximum SPL of 106 dB per pair. That is enough headroom for tracking at sane listening levels, mix decisions at louder reference levels, and final master checks - all from the same speaker pair. Beveled Cabinet and Rear Bass Reflex Port for Desktop-Sized Rooms The T5V cabinet measures 7.0 in wide, 11.7 in tall, and 11.5 in deep - small enough to fit on a desk behind the computer monitor, dense enough at 12.3 lb per unit to stay anchored. The beveled front baffle is not cosmetic: angled edges reduce diffraction artifacts that smear the stereo image, particularly noticeable at the mix position. The rear-firing bass reflex port loads the cabinet for extended low end, but it also means the T5V needs at least 4 to 6 inches of space behind it - a consideration for buyers who plan to mount the monitors against a wall. For wall-adjacent placement, the LF Shelf EQ control trims +/- 2 dB below 300 Hz to compensate. Dual Inputs and Room-Compensation EQ Built In The back panel carries both an XLR balanced input (10 kOhm impedance) and an RCA unbalanced input (20 kOhm) - one monitor handles a pro audio interface and a consumer DJ controller equally well. Input sensitivity adjusts from -10 to +4 dB to match the output level of whatever source is driving it. Two shelf-EQ controls let the buyer trim the response for the room: +/- 2 dB on the HF shelf above 6 kHz, +/- 2 dB on the LF shelf below 300 Hz. The DSP control means these adjustments are precise and repeatable - no analog pot drift, no component aging. The Step-Up From Consumer Speakers and the First-Time Reference Pair For the first-time studio buyer, the T5V is the monitor that earns its keep on every track - the U-ART tweeter shows you what your mixes actually sound like, not what you wish they did. For the upgrader leaving JBL, KRK, or Yamaha HS-series, the T5V is the move that brings ribbon-tweeter detail into the listening chain without doubling the spend. For the producer building toward a full monitoring setup, the T5V also pairs with the Adam Audio T10S subwoofer for an extended low end when the room and budget allow. Sold individually - order two for a stereo pair.

View Full Listing

$239.99