MARTINEZ, GA, United States
About this listing
The Switchblade+ offers a convenient solution to a players switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick.Quick Specs- Route your signal to output A or output B or both simultaneously- Easily switch between different pedal boards- The tuner jack is hardwired to the input jack and provides a direct output for a tuner or other effects regardless of the state of the unit- The audio path is completely passive- The Switchblade Plus can be powered by a 9 volt battery or 9VDC eliminator- Dimensions in inches: 2.75 (w) x 4.5 (l) x 2.1 (h)- Dimensions in mm: 70 (w) x 115 (l) x 54 (h) ControlsA/B Footswitch (LED) Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED).A+B Footswitch (LED) Press this switch to route the input signal to both OUT A and OUT B When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal path. I/O INPUT Connect the output of your instrument or another effects pedal to this jack.TUNER Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit. OUT A Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A is selected.OUT B Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT B is selectedPower The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Boss & Ibanez 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative.The SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function.When A+B is engaged, the input impedance at the INPUT jack is equal to 50k in parallel with the combined input impedances of the devices connected to the TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal to 100k in parallel with the combined input impedances of the devices connect to the TUNER jack and OUT A or OUT B.
PriceA$83.35
+ A$294.61 Shipping
30-Day Return Policy
Enjoy peace of mind with your new gear
1
6 in stock
