Toronto, Canada
About this listing
Open Box: This product has been opened for quality control or showcase, but it is in brand new condition. Full warranty applies.The Blackstar ID:X Floor Two is an amp modeler and multi-effects unit for electric, bass and acoustic guitar with a built-in expression pedal. It carries the full ID:X Floor sound engine: 12 guitar amp models, three bass amps, two acoustic voices and an acoustic simulator, with more than 30 effects in four blocks. The pedal works as volume, wah or a custom control, two footswitches step through 99 patches, and a third handles tap tempo and the tuner.
Amp Models
Six guitar voices are Blackstar's own, drawn from the St. James, Artisan, HT Club and Series One amps. The other six are Ampton models, component-level recreations of a 1969 Twin Reverb, a pre-production Vox AC30, a late-1960s Marshall Super Lead, a Marshall JCM800 2203, the red channel of a Mesa Boogie Dual Rectifier and a 1992 Peavey 5150. A Response switch gives the guitar voices the feel of EL84, EL34 or 6L6 power tubes, and the bass voices get Linear, 6550 and 6L6 settings. The patented ISF control sweeps the EQ between a tight American character and a looser British one.
Expression Pedal
An EXP Mode button cycles the pedal between Volume, Wah and Custom, and a toe switch turns it on and off. Volume can sit before the preamp or at the end of the chain, and Wah has Classic and Modern types. In Custom mode the pedal takes over any continuous amp or effect parameter, such as reverb mix, delay time or amp treble.
Connections
Stereo XLR outputs go straight to a mixer or stage box, and the 1/4-inch stereo output feeds headphones or full-range speakers. CabRig handles the speaker and mic simulation on those outputs, with six Blackstar cabinets, three mic types and Blackstar's In The Room algorithm. The To Amp output skips CabRig for use with an external power amp and a guitar cabinet. Over USB-C the unit works as an audio interface, sending CabRig left and right, the dry guitar and the preamp signal to your computer, and the free Architect software handles deeper editing and patch sharing. MIDI In takes program and control change messages from an external controller for patch changes and effect switching.
Features
12 guitar amp voices: six Blackstar models and six Ampton models
Three bass amp voices, two acoustic voices and an acoustic simulator
Response control with EL84, EL34 and 6L6 settings for guitar, Linear, 6550 and 6L6 for bass
Patented ISF tone control, noise gate, Resonance and Presence
Four effect blocks (Pre FX, Modulation, Delay, Reverb) with more than 30 effects
CabRig IR-based cabinet and mic simulation with In The Room modeling
99 patch locations and Manual mode
OLED display and built-in tuner
Built-in expression pedal with Volume, Wah and Custom modes
Patch up, patch down and tap tempo footswitches
USB-C audio interface and Architect editing software
Stereo XLR outputs, stereo headphone and line output, and To Amp output
3.5 mm line input for backing tracks
MIDI In
Runs on a 9 V DC, 500 mA pedalboard supply
Specifications
Type: Amp modeler and multi-effects floor unit with expression pedal
Voices: 12 guitar amp, 3 bass amp, 2 acoustic plus acoustic simulator
Effects: Pre FX, Modulation, Delay and Reverb blocks, more than 30 effects
Patches: 99
Footswitches: 3 (patch down, patch up, tap and tuner)
Expression pedal: Built in, Volume, Wah or Custom
Inputs: 1/4" instrument input, 3.5 mm line in, MIDI In
Outputs: 2 x XLR (L/mono, R), 1/4" stereo headphone and line out, 1/4" To Amp, USB-C audio
Power: 9 V DC, 500 mA, center negative, adapter supplied
Dimensions: 315 x 68 x 173 mm
Weight: 2.07 kg (4.6 lbs)
PriceC$367.63
14-Day Return Policy
Enjoy peace of mind with your new gear
