​Dual 1209 Idler Drive Turntable - Serviced & Lubricated - w/ Shure M71 Cartridge & Dual TVV46 Preamp

​Description

​Up for sale is a classic piece of German engineering: the Dual 1209 Idler Drive turntable. This unit comes mounted in its original wood plinth (Type CK 6) and includes the highly sought-after Dual TVV46 internal preamplifier, making it a "plug and play" solution for modern setups.

​Mechanical Condition:

​I have personally performed a basic service on this unit to ensure it stays spinning for years to come:

​Degreased: Removed the notorious "dried-up" factory grease that often freezes these vintage models.

​Lubricated: Re-oiled and re-lubricated the main mechanical points.

​Regulated: Key adjustments have been made for proper operation.

​Functionality: It is in good working condition. While it may not be "1000% factory perfect" due to its age (50+ years), it starts, spins at speed, and plays reliably.

​Cosmetic Condition:

​Plinth: The original wood base is in great shape with a beautiful grain, showing only minor traces of use and a small scuff on the front-left wood veneer as seen in the photos.

​Dustcover: The smoked acrylic cover is included. Please note it has a visible fissure/crack (refer to photos), but it is NOT broken or structurally compromised. It still sits perfectly and protects the unit.

​General: Shows honest signs of age ("patina") that add to its vintage charm.

​Key Features:

​Cartridge: Equipped with a vintage Shure M71 MB-D. These are famous for their warm, punchy "rock and roll" sound.

​Preamp: Includes the original Dual TVV46. This allows you to connect the turntable directly to any "Aux" or "Line" input without needing an external phono box.

​Speed: Supports 33, 45, and 78 RPM.

I

mportant Note for US / 60Hz Buyers:

​Voltage: This unit is currently configured for multi-voltage (110V/220V).

​Frequency/Pulley: This turntable is currently fitted with a 50Hz motor pulley. If you are located in North America (USA/Canada) or any 60Hz region, you will need to source and install a 60Hz motor pulley for the platter to spin at the correct speed. Without this change, the turntable will play significantly faster due to the frequency difference.

Shipping & Terms:

​This is a vintage mechanical device. I will pack it with extreme care (securing the platter and tonearm). Sold "As-Described" due to the nature of vintage electronics.