B-stock *** The unit has been used for display at trade shows. Generally no true signs of use, but packaging is slightly damaged. Hence B-stock status.***

Pass from the Dusk, through the Night to the Dawn with the Collision Devices Nocturnal. Modulated Delay, Dynamic Tremolo and Shimmer Reverb all in one pedal!

The modulated delay is a warm and inspirational delay based on a tape delay circuit. Add to that, a shimmer reverb to loose all sense of time, and a dynamic tremolo that oscillates faster as you pump the reverb into it.

Combine all 3 effects or run them separately, the Nocturnal will bring you endless soundscape possibilities from Dusk to Dawn.

DESCRIPTION DUSK

Modulated Delay

Warmed and inspirational delay based on a tape delay circuit.

Settings :

Mix : Controls the mix between Full Dry or 50% Dry / 50% Wet

Time : Time between each repetition. From a few ms to 1 second. Signal quality turns to Lo-Fi when it’s pushed to long repeats.

Feedback : Number of repetitions. Able to self oscillate very easily when the knob is around 7.5.

Modulation : Amount of modulation in the delay repetitions. Create a sort of old tape effect

Speed : Modulation’s frequency from 0.1 to 20 Hz.

NIGHT

Dynamic Tremolo

Turn a huge amount of shimmer and reverb into it to make it oscillate faster.

Settings :

Sens : Sensibility, turn it clockwise to make the tremolo more sensitive to your attack

Depth : Controls the tremolo’s volume

DAWN

Shimmer

Create bright soundscapes and loose the notion of time until the sunrise.

Settings :

Blend : Controls the amount of Dry/Wet signal. You can have a full Wet reverb.

Reverb : Reverberation time. Max 15 sec.

Shimmer : Makes the reverb shimmer

Filter : Digital filter. Low pass. Lets you make the shimmer darker or more shiny

Colour : Bandpass active and analog filter around 3.3 kHz. Controls the Q of the filter.

Maximum current draw 400 mA

Imput Impedance 1 MOhm

Voltage +9V DC (négative center)

Output Impedance 10 KOhm

Weight 250gr

Size 119 x 116 x 56mm

• The use of an isolated power supply is recommended for powering all Collision devices Pedals.
• Power supply not included.
• The pedal is buffered bypass