*Brand New Item in Pristine Condition!
**Radial Authorized Dealers in Quebec City, Canada!!

The BT-Pro V2 is a Bluetooth-enabled direct box that connects wirelessly to smartphones, tablets, and other mobile devices and provides a pair of balanced analog audio outputs to feed a PA system. Each BT-Pro V2 has a unique identifier, allowing multiple units to be used within the same building. The latest model of the BT-Pro can also be powered via 48V phantom from a mixing console.

The BT-Pro V2 makes it easy to quickly connect to any smartphone, tablet, or mobile device for high quality audio playback through a sound system. It wirelessly pairs over Bluetooth, eliminating the need to search for adaptor cables and providing you with the freedom to move around while staying connected. Superior audio quality is provided using the Bluetooth 5.0 protocol, allowing the BT-Pro to be used for playback even in critical listening environments. While the BT-Pro V2 is designed to last with a 14 gauge steel outer shell and high durability connectors and controls, it also has an enhanced reception range thanks to the plastic injection-molded insert, which allows wireless signals to pass through unimpeded. Balanced XLR outputs are provided for connection to pro audio equipment, with a level control to allow for easy volume adjustments, a headphone output for testing purposes, and a mono switch to reduce channel requirements when needed.

Features:

• Level: Used to set the overall output volume at the XLR and headphone outputs.
• Mono: Sums the stereo signal to mono. When active, the LED indicator illuminates. Mono mode allows you to reduce the channel count on the PA or send identical mono signals to two separate audio systems simultaneously.
• Headphone: Mini 3.5mm stereo (1/8") TRS headphone output is used to check the output from the source for troubleshooting.
• Pair/Reset: Press and hold the PAIR button for three seconds to disconnect from any Bluetooth devices and force the BT-Pro into pairing mode. Press the recessed RESET switch to power-cycle the BT-Pro. The red/yellow PAIR LED indicates the pairing and playback status of the BT-Pro.
• Power Input/USB: Used to locally power the BT-Pro. Connect the included USB Type-C cable to a computer or a USB wall charger (included). This is a power input only that will not pass audio or other data.
• XLR Out: Standard XLR male outputs provide balanced audio outputs to connect to a PA system. The BT-Pro can be powered remotely by providing 48V phantom power to these outputs.
• Ground Lift: Used to help eliminate hum and buzz caused by ground loops. Lifts pin-1 on both XLR outputs.
• Plastic Insert: The BT-Pro combines a 14 gauge steel outer shell with an injection-molded plastic insert which allows wireless signals to pass though unimpeded, enhancing the effective range of the device while ensuring it handles the stresses of nightly use on tour.

---

[1] Our listings may use generic pictures of the same model or pictures from a different unit of the same model. Ask us if you want to see some pictures of the available units.

[2] Our Shipping Flat Rates or free shipping include full insurance of the total value of the item, and apply for most Metropolitan areas in North America. Locations outside major Metropolitan areas might be subject to EXTRA shipping costs for the buyer. If that situation applies, please send us a message including your ZIP code to verify your personalized and accurate quote on shipping rates and extra fees.

[3] All Custom fees are the responsibilities of the buyer. Buyer must contact Custom to insure a correct custom rate. We cannot do any custom quote or be responsible for any customs fees.

[4] All instruments are inspected and set up before shipping, therefore all boxes could be opened. We may also ship in a different box if we judge it is more secure to use a better packaging. If an instrument needs a setup at destination, there are the sole buyer responsibilities as the instrument has been verified and set up before shipping.

[5] There is NO return for international transactions and overseas shipping. Our return policy does not apply to International transactions, only to the Canadian market. It is the Buyer’s responsibility to verify if the manufacturer will accept the warranty for an international transaction, otherwise they will be considered as used.

[6] If an item arrives Damaged, please send us pictures of the external box and damage within the first 24 hours. Failure to do so will automatically void the insurance with the carrier. Keep the box until further notice and wait for our instructions for the next step. Having an instrument setup by yourself or a non-certified technician could void the warranty and insurance on shipping.

[7] All used items are final sales, the return policy does not apply.

Visit our website or call us anytime if you need more information +1-418-831-9010 !